Worked example
Example: Four wet mills, w 0.30. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Fibre per unit cane | 15.000 % |
| Fibre in bagasse after dry crushing | 50.000 % |
| Sugar/juice extraction ratio in dry crushing | 1.0700 - |
| Number of wet-crushing mills | 4.0000 - |
| Imbibition water per unit cane | 30.000 % |
| Imbibition efficiency | 65.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Imbibition per unit fibre w/f | 2.0000 |
| Extraction by dry crushing | 88.118 % |
| Total extraction, simple imbibition | 95.526 % |
| Total extraction, compound imbibition | 96.214 % |
Open this example in the calculator and change any input.
Formula
\(\lambda = \frac{w}{f}, \quad e_d = \min\left[1, \frac{\alpha(m - f)}{m(1 - f)}\right], \quad r_s = \frac{\lambda m}{n(1 - m) + \lambda m}, \quad E_s = e_d + (1 - e_d)[1 - (1 - \beta r_s)^n]\)
\(r = \frac{\lambda m}{1 - m + \lambda m}, \quad \lambda' = \frac{\beta r}{1 - \beta r}, \quad E_c = e_d + (1 - e_d)\,\lambda'\frac{\lambda'^n - 1}{\lambda'^{n+1} - 1}\ \left(\lambda' \ne 1\right), \quad E_c = e_d + (1 - e_d)\frac{n}{n + 1}\ \left(\lambda' = 1\right)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(f\) | Fibre per unit cane | - |
| \(m\) | Fibre in bagasse after dry crushing | - |
| \(\alpha\) | Sugar/juice extraction ratio in dry crushing | - |
| \(n\) | Number of wet-crushing mills | - |
| \(w\) | Imbibition water per unit cane | - |
| \(\beta\) | Imbibition efficiency | - |
| \(\lambda\) | Imbibition per unit fibre w/f | - |
| \(e_d\) | Extraction by dry crushing | - |
| \(E_s\) | Total extraction, simple imbibition | - |
| \(E_c\) | Total extraction, compound imbibition | - |
Method and standards
Hugot's mathematical study of imbibition, Handbook of Cane Sugar Engineering, 3rd ed., ch. 19, eqns 19.5–19.16, pp. 284–293. The simple-imbibition forms are Hugot's own general-m forms (19.5, 19.7, 19.9); the same m for the dry-crushing and wet mills is Hugot's hypothesis (p. 285). Hugot derives compound imbibition for m = 0.5 (p. 293); the calculator generalises it by taking λ as r/(1 − r), the ratio Hugot uses on p. 294.
Where it is used
- Comparing imbibition schemes.
- Estimating the gain from more imbibition.
Common mistakes
- Entering imbibition % fibre as w.
- Taking β = 1.
Assumptions and limits
- Constant bagasse fibre after each wet mill.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 19
- eqns 19.3–19.16
- pp. 281–293
Questions and answers
Why does λ matter more than w?
Extraction by wet crushing depends on imbibition per unit fibre; doubling fibre and water together changes nothing.
Is compound always better?
In theory by far; with a realistic efficiency β the gap shrinks a lot, which is Hugot's main point.
What is β?
The share of the theoretical sugar that each imbibition actually recovers, because water does not mix with all the juice in the bagasse.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.