FireCADCalc

Imbibition Water % Cane and % Fibre

Imbibition water flow and imbibition % fibre from the crushing rate, added water % cane and fibre % cane.

Sugar mill and cogeneration

Inputs

Examples: 250 TCH, 30 % on cane120 TCH, high fibre

Results

Every tonne of imbibition water must later be evaporated: balance extraction against evaporator steam.

Imbibition water flow75.000t/h
Imbibition % fibre206.90%
Fibre crushed36.250t/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 250 TCH, 30 % on cane. The inputs, in the units selected above:

InputValue
Crushing rate250.00 t/h
Added (imbibition) water % cane30.000 %
Fibre % cane14.500 %

Applying the formula below gives:

ResultValue
Imbibition water flow75.000 t/h
Imbibition % fibre206.90 %
Fibre crushed36.250 t/h

Open this example in the calculator and change any input.

Formula

\(\dot m_w = C\,AW, \quad \dot m_F = C\,F_c, \quad AW/F = \frac{AW}{F_c}\)

Variables

Symbol Meaning SI unit
\(C\) Crushing rate kg/s
\(AW\) Added (imbibition) water % cane -
\(F_c\) Fibre % cane -
\(\dot m_w\) Imbibition water flow kg/s
\(AW/F\) Imbibition % fibre -
\(\dot m_F\) Fibre crushed kg/s

Method and standards

Definitions.

Where it is used

  • Mill control.
  • Steam balance studies.

Common mistakes

  • Mixing % cane and % fibre bases.

Assumptions and limits

  • Steady crush.

References

  • Sugar factory chemical control (daily manufacturing report) definitions
  • as compiled in SugarProcessTech
  • Formulas for calculating sugar industry DMR

Questions and answers

Why express imbibition on fibre?

Fibre holds the juice; water per fibre compares mills with different cane.

More imbibition is always better?

Extraction rises, but so does evaporation and steam; there is an economic optimum.

Hot or cold imbibition?

Hot water extracts better but can soften bagasse feeding; mills choose by trial.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.