Worked example
Example: Hugot pp. 207-211: 300 TCH, first mill. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Crushing rate | 300.00 t/h |
| Fibre % cane | 15.000 % |
| Roller speed | 6.0000 rpm |
| Roller diameter | 0.99000 m |
| Roller length | 2.1340 m |
| Fibre % of the bagasse leaving the mill | 33.000 % |
| Density of the juice in the mill | 1,040.0 kg/m³ |
| Re-absorption factor | 1.3500 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| No-void volume of the bagasse | 0.86457 L/kg |
| Density of compressed bagasse | 1,156.6 kg/m³ |
| Fibre index f′ d_B r | 515.29 kg/m³ |
| Fibre loading | 18.833 kg/m² |
| Working delivery opening | 36.550 mm |
Open this example in the calculator and change any input.
Formula
\(V_0 = \frac{1}{d_J} - \left(\frac{1.20}{d_J} - 0.86\times10^{-3}\ \mathrm{m^3/kg}\right)f', \quad d_B = \frac{1}{V_0}, \quad \varphi = f' d_B r, \quad q = \frac{A f}{\pi D n L}, \quad e_A = \frac{q}{\varphi}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(A\) | Crushing rate | kg/s |
| \(f\) | Fibre % cane | - |
| \(n\) | Roller speed | 1/s |
| \(D\) | Roller diameter | m |
| \(L\) | Roller length | m |
| \(f'\) | Fibre % of the bagasse leaving the mill | - |
| \(d_J\) | Density of the juice in the mill | kg/m³ |
| \(r\) | Re-absorption factor | - |
| \(V_0\) | No-void volume of the bagasse | m³/kg |
| \(d_B\) | Density of compressed bagasse | kg/m³ |
| \(\varphi\) | Fibre index f′ d_B r | kg/m³ |
| \(q\) | Fibre loading | kg/m² |
| \(e_A\) | Working delivery opening | m |
Method and standards
Hugot's no-void volume of bagasse (fibre density 1.52, fibraque 1.2 × fibre) and continuity through the delivery opening.
Where it is used
- Setting delivery openings from first principles.
- Checking settings for a new crush rate.
Common mistakes
- Using fibre % cane instead of % bagasse for f′.
- Ignoring re-absorption.
Assumptions and limits
- V₀ in dm³/kg in Hugot's form, where the constant is 0.86 dm³/kg; here it is written in SI as 0.86 × 10⁻³ m³/kg with d_J in kg/m³.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 10
- eqns 10.14–10.17
- p. 136; ch. 13
- eqns 13.4–13.5 and the example of pp. 207–211
Questions and answers
What is the no-void volume?
The volume of a kilogram of bagasse squeezed until no air is left: fibre, its water and the juice.
What is re-absorption?
The blanket swells as it leaves the nip and draws back juice; the opening must pass more volume than the compressed bagasse alone.
Which juice density?
The density of the juice in that mill, about 1 % above its density at atmospheric pressure (Hugot eqn 10.17).
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.