Worked example
Example: Hugot dilution example. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Imbibition water % cane | 29.060 % |
| Mixed juice % cane | 102.00 % |
| Cane weight lost in the yard % cane | 0.75000 % |
| Juice evaporated at the mills % cane | 0.75000 % |
| Fibre % bagasse | 48.000 % |
| Brix of primary juice | 19.160 % |
| Brix of mixed juice | 14.980 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Bagasse % cane, uncorrected 100 + W − Q | 27.060 % |
| Bagasse % cane, corrected for losses | 25.560 % |
| Fibre % cane, uncorrected | 12.989 % |
| Fibre % cane, corrected | 12.269 % |
| Dilution % primary juice 100(B₁ − B_m)/B_m | 27.904 % |
| Dilution / imbibition (Shannon) | 0.96022 |
Open this example in the calculator and change any input.
Formula
\(B = 100 + W - Q, \quad B_c = B - (\gamma + \zeta), \quad f = f'\frac{B}{100}, \quad f_c = f'\frac{B_c}{100}, \quad D = \frac{100(B_1 - B_m)}{B_m}, \quad k = \frac{D}{W}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(W\) | Imbibition water % cane | - |
| \(Q\) | Mixed juice % cane | - |
| \(\gamma\) | Cane weight lost in the yard % cane | - |
| \(\zeta\) | Juice evaporated at the mills % cane | - |
| \(f'\) | Fibre % bagasse | - |
| \(B_1\) | Brix of primary juice | - |
| \(B_m\) | Brix of mixed juice | - |
| \(B\) | Bagasse % cane, uncorrected 100 + W − Q | - |
| \(B_c\) | Bagasse % cane, corrected for losses | - |
| \(f\) | Fibre % cane, uncorrected | - |
| \(f_c\) | Fibre % cane, corrected | - |
| \(D\) | Dilution % primary juice 100(B₁ − B_m)/B_m | - |
| \(k\) | Dilution / imbibition (Shannon) | - |
Method and standards
Hugot's basic equation for mills and Shannon's check.
Where it is used
- Daily chemical control.
- Checking imbibition and juice scales.
Common mistakes
- Using gross mixed juice.
- Taking fibre % bagasse from a wet sample.
Assumptions and limits
- All quantities per 100 cane weighed.
- A note flags a mixed juice brix at or above the primary juice brix, and a Shannon ratio outside 0.95–1.05.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 21
- eqns 21.7–21.15 and dilution (Shannon)
- pp. 333–341
Questions and answers
Why correct for losses?
Cane dries in the yard and juice evaporates at the mills; ignoring this makes the computed bagasse 3–10 % too high.
Imbibition or dilution?
Imbibition is water added at the mills; dilution is the part of it that reaches the mixed juice. The difference stays in the bagasse.
Is the uncorrected figure wrong?
It is the official figure in most control schemes; Hugot asks that its limits be known.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.