FireCADCalc

Lost Juice % Fibre and Extraction Ratio

Extraction ratio (eqn 20.11), brix of bagasse and lost undiluted juice % fibre (eqns 20.12–20.13) from routine mill analyses, as used to compare tandems.

Sugar mill and cogeneration

Inputs

Examples: Typical tandemWeaker milling

Results

The extraction ratio (a plain number) and lost juice % fibre (shown in %) are close for modern mills, both near 34 (Hugot).

Extraction ratio 100(100 − e)/f31.034
Brix of bagasse2.5000%
Lost undiluted juice % fibre25.510%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Typical tandem. The inputs, in the units selected above:

InputValue
Pol extraction95.500 %
Fibre % cane14.500 %
Pol % bagasse1.8000 %
Purity of the last expressed juice72.000 %
Brix of primary juice20.000 %
Fibre % bagasse49.000 %

Applying the formula below gives:

ResultValue
Extraction ratio 100(100 − e)/f31.034
Brix of bagasse2.5000 %
Lost undiluted juice % fibre25.510 %

Open this example in the calculator and change any input.

Formula

\(ER = \frac{100(100 - e)}{f}, \quad Bx_B = \frac{Pol_B}{P_l}, \quad LJ = \frac{Bx_B}{B_1\,f'}\)

Variables

Symbol Meaning SI unit
\(e\) Pol extraction -
\(f\) Fibre % cane -
\(Pol_B\) Pol % bagasse -
\(P_l\) Purity of the last expressed juice -
\(B_1\) Brix of primary juice -
\(f'\) Fibre % bagasse -
\(ER\) Extraction ratio 100(100 − e)/f -
\(Bx_B\) Brix of bagasse -
\(LJ\) Lost undiluted juice % fibre -

Method and standards

Hugot's definitions (percent forms written with fractions).

Where it is used

  • Comparing milling performance.
  • Weekly mill reports.

Common mistakes

  • Using fibre % bagasse in the extraction ratio.
  • Using mixed juice brix for primary juice brix.

Assumptions and limits

  • Routine analyses; apparent purities.
  • ER is Hugot's plain number 100(100 − e)/f with e and f in per cent; LJ is shown in per cent. Both come out near 34 for modern tandems, which is why they can be compared directly.
  • Purity above 100 % is rejected.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 20
  • eqns 20.11–20.14
  • pp. 319–320

Questions and answers

Which is better, extraction ratio or lost juice?

Hugot prefers the extraction ratio: it measures sugar, the thing sold, and is simple.

Why is brix of bagasse uncertain?

It uses the purity of the last expressed juice, which is higher than the purity of the juice left in the bagasse.

Typical values?

Both lie between about 30 and 38 for modern tandems.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.