FireCADCalc

Mill Hydraulic Load and Specific Pressure (Hugot)

Total hydraulic load on the top roller from ram size and oil pressure less packing friction, its specific pressure in t/dm², journal pressure and Hugot normal load.

Sugar mill and cogeneration

Inputs

Examples: 1067 x 2134, 380 mm rams at 300 kg/cm2762 x 1524, 280 mm rams

Hugot: design 250–350 kg/cm², commonly 300.
Hugot: 3–5 %.

Results

Hugot keeps journal pressures below about 110 kg/cm² for mills (70–80 for crushers); most mills run at 20–25 t/dm² specific pressure.

Total hydraulic load on the top roller653.25tf
Specific hydraulic pressure F/(LD/10)28.689t/dm²
Journal bearing pressure (half the load / journal area)97.210kgf/cm²
Hugot's mean load 250 L D tonnes (25 t/dm²)569.24tf

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 1067 x 2134, 380 mm rams at 300 kg/cm2. The inputs, in the units selected above:

InputValue
Ram (piston) diameter380.00 mm
Number of rams2.0000 -
Oil pressure (gauge)300.00 kgf/cm²
Packing friction as a share of the load4.0000 %
Roller length2.1340 m
Roller diameter1.0670 m
Journal diameter560.00 mm
Journal (bearing) length600.00 mm

Applying the formula below gives:

ResultValue
Total hydraulic load on the top roller653.25 tf
Specific hydraulic pressure F/(LD/10)28.689 t/dm²
Journal bearing pressure (half the load / journal area)97.210 kgf/cm²
Hugot's mean load 250 L D tonnes (25 t/dm²)569.24 tf

Open this example in the calculator and change any input.

Formula

\(F = n_r\,p_o\,\frac{\pi d_r^2}{4}(1 - \varphi), \quad p = \frac{F}{L D / 10}, \quad p_j = \frac{F/2}{d_j\,l_j}, \quad F_n = 250\,L D\ \mathrm{t}\)

Variables

Symbol Meaning SI unit
\(d_r\) Ram (piston) diameter m
\(n_r\) Number of rams -
\(p_o\) Oil pressure (gauge) Pa
\(\varphi\) Packing friction as a share of the load -
\(L\) Roller length m
\(D\) Roller diameter m
\(d_j\) Journal diameter m
\(l_j\) Journal (bearing) length m
\(F\) Total hydraulic load on the top roller N
\(p\) Specific hydraulic pressure F/(LD/10) Pa
\(p_j\) Journal bearing pressure (load of one ram / journal area) Pa
\(F_n\) Hugot's mean load 250 L D tonnes (25 t/dm²) N

Method and standards

Ram force less packing friction (Hugot eqns 10.1–10.2) over the roller and journal areas.

Where it is used

  • Setting and checking mill hydraulics.
  • Comparing pressure between mills.

Common mistakes

  • Entering the accumulator gas pressure instead of oil pressure.
  • Using the circumference instead of L × D.

Assumptions and limits

  • Static load; roller floating freely.
  • The top roller rests on two journals, so each carries half the total load whatever the number of rams. A note appears above Hugot's 110 kg/cm².

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 10
  • eqns 10.1–10.6
  • 10.82–10.83 and journal pressures
  • pp. 117–125 and 172–174

Questions and answers

What is s.h.p.?

Specific hydraulic pressure: the total hydraulic load on the top roller divided by one tenth of the roller's projected area, L × D/10, quoted in t/dm² (Hugot's convention, which is why his normal load 250 L D tonnes, with L and D in metres, equals 25 t/dm²).

Normal values?

Hugot reports 12–40 t/dm², mostly 20–25; the crusher about half the first mill; the last mill 28–30.

Why subtract packing friction?

The ram packings hold back 3–5 % of the oil force before it reaches the journals.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.