FireCADCalc

Black Liquor Evaporators: Water Removed and Steam

Water to evaporate when weak black liquor is concentrated to heavy liquor, and the live steam from the evaporator train's steam economy (kg water per kg steam).

Pulp and paper

Inputs

Examples: 10 000 t/d from 15 % to 72 %Seven effects to 80 %

Results

The last step to 75–80 % solids is often done in a concentrator; washing more (higher dilution factor) adds directly to this water.

Heavy liquor2,400.0t/d
Water evaporated400.00t/h
Live steam66.667t/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 10 000 t/d from 15 % to 72 %. The inputs, in the units selected above:

InputValue
Weak black liquor10,000 t/d
Weak liquor solids15.000 %
Heavy liquor solids72.000 %
Steam economy5.0000 -

Applying the formula below gives:

ResultValue
Heavy liquor2,083.3 t/d
Water evaporated329.86 t/h
Live steam65.972 t/h

Open this example in the calculator and change any input.

Formula

\(\dot m_h = \dot m_w\frac{x_1}{x_2}, \quad \dot m_{ev} = \dot m_w - \dot m_h, \quad \dot m_s = \frac{\dot m_{ev}}{E}\)

Variables

Symbol Meaning SI unit
\(\dot m_w\) Weak black liquor kg/s
\(x_1\) Weak liquor solids -
\(x_2\) Heavy liquor solids -
\(E\) Steam economy -
\(\dot m_h\) Heavy liquor kg/s
\(\dot m_{ev}\) Water evaporated kg/s
\(\dot m_s\) Live steam kg/s

Method and standards

Solids balance with steam economy.

Where it is used

  • Evaporator sizing and steam budgets.

Common mistakes

  • Mixing wet and dry solids bases.

Assumptions and limits

  • No solids removed.

References

  • Smook
  • Handbook for Pulp & Paper Technologists
  • 3rd ed. (Angus Wilde, 2002)
  • ch. 10 (black liquor evaporation from about 15 % to 70–75 % solids)

Questions and answers

Why is economy important?

Six-effect trains evaporate 5–6 kg of water per kg of steam; the evaporators are the mill's largest steam user.

Why does washing affect it?

Every tonne of extra shower water must be evaporated here.

Is the solids balance exact?

Yes, if no solids are added or lost (soap skimming removes a little).

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.