Worked example
Example: 80 g/m2, 100 µm copy paper. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Grammage (basis weight) | 80.000 g/m² |
| Caliper (thickness) | 0.10000 mm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Apparent density | 800.00 kg/m³ |
| Bulk | 1.2500 L/kg |
| Basis weight, lb per 3000 ft² | 49.156 |
| Basis weight, lb per ream 25 × 38 in | 54.049 |
| Basis weight, lb per ream 17 × 22 in | 21.278 |
Open this example in the calculator and change any input.
Formula
\(\rho_a = \frac{G}{t}, \quad B = \frac{t}{G}, \quad BW = G \times A_{ream}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(G\) | Grammage (basis weight) | kg/m² |
| \(t\) | Caliper (thickness) | m |
| \(\rho_a\) | Apparent density | kg/m³ |
| \(B\) | Bulk | m³/kg |
| \(BW_{3000}\) | Basis weight, lb per 3000 ft² | - |
| \(BW_{25\times38}\) | Basis weight, lb per ream 25 × 38 in | - |
| \(BW_{17\times22}\) | Basis weight, lb per ream 17 × 22 in | - |
Method and standards
Definitions; ream areas from the sheet sizes.
Where it is used
- Grade specifications.
- Converting US and metric grades.
Common mistakes
- Mixing grammage and ream weight.
- Measuring caliper with the wrong pressure.
Assumptions and limits
- Conditioned paper.
References
- Smook
- Handbook for Pulp & Paper Technologists
- 3rd ed. (Angus Wilde, 2002)
- ch. 22 (paper properties: basis weight, caliper, density and bulk)
Questions and answers
What is bulk?
The reciprocal of density, in cm³/g; tissue and board are high-bulk grades.
Why several ream sizes?
US grades use different basic sheets: 25 × 38 in for book and offset, 17 × 22 in for bond, 3000 ft² for newsprint and board.
What is 80 g/m² in pounds?
About 54 lb (25 × 38), 21 lb (17 × 22) or 49 lb per 3000 ft².
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.