FireCADCalc

Recovery Boiler: Black Liquor Solids, Heat Input and Steam

Black liquor dry solids per day, heat input and steam generation of a kraft recovery boiler from liquor flow, solids content, heating value and boiler efficiency.

Pulp and paperBoiler

Inputs

Examples: 2400 t/d at 72 %High solids 80 %

Results

Recovery boilers are rated in tonnes of dry solids per day; 1.5–1.8 t of solids per air-dry tonne (ADt) of pulp is typical for kraft. Here 3.11 t per ADt (the output is per oven-dry tonne; 1 ADt = 0.9 OD t).

Dry solids fired1,728.0t/d
Heat input280.00MW
Steam generated225.93t/h
Dry solids per OD tonne of pulp3.4560kg/kg
Steam per OD tonne of pulp10.845kg/kg

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 2400 t/d at 72 %. The inputs, in the units selected above:

InputValue
Heavy black liquor flow2,400.0 t/d
Dry solids content72.000 %
Heating value of the dry solids14.000 MJ/kg
Boiler efficiency (on HHV of solids)65.000 %
Enthalpy rise feedwater to steam2,900.0 kJ/kg
Pulp production (oven-dry)1,000.0 t/d

Applying the formula below gives:

ResultValue
Dry solids fired1,728.0 t/d
Heat input280.00 MW
Steam generated225.93 t/h
Dry solids per OD tonne of pulp1.7280 kg/kg
Steam per OD tonne of pulp5.4223 kg/kg

Open this example in the calculator and change any input.

Formula

\(\dot m_{DS} = \dot m_{BL}x, \quad Q = \dot m_{DS}HHV, \quad \dot m_s = \frac{\eta Q}{\Delta h}, \quad DS/\text{pulp} = \frac{\dot m_{DS}}{\dot m_{OD}}, \quad \text{steam}/\text{pulp} = \frac{\dot m_s}{\dot m_{OD}}\)

Variables

Symbol Meaning SI unit
\(\dot m_{BL}\) Heavy black liquor flow kg/s
\(x\) Dry solids content -
\(HHV\) Heating value of the dry solids J/kg
\(\eta\) Boiler efficiency (on HHV of solids) -
\(\Delta h\) Enthalpy rise feedwater to steam J/kg
\(\dot m_{OD}\) Pulp production (oven-dry) kg/s
\(\dot m_{DS}\) Dry solids fired kg/s
\(Q\) Heat input W
\(\dot m_s\) Steam generated kg/s
\(DS/\text{pulp}\) Dry solids per OD tonne of pulp kg/kg
\(\text{steam}/\text{pulp}\) Steam per OD tonne of pulp kg/kg

Method and standards

Heat input and simple efficiency.

Where it is used

  • Recovery capacity planning.
  • Mill steam balances.

Common mistakes

  • Using as-fired instead of dry solids.
  • Applying power-boiler efficiencies.

Assumptions and limits

  • Efficiency on dry-solids HHV.
  • The per-pulp figures are per oven-dry tonne; multiply by 0.9 for per air-dry tonne (ADt), the basis of the usual 1.5–1.8 t solids per ADt.

References

  • Smook
  • Handbook for Pulp & Paper Technologists
  • 3rd ed. (Angus Wilde, 2002)
  • ch. 10 (chemical recovery: heavy black liquor at 70–75 % solids burnt in the recovery furnace)

Questions and answers

Why is efficiency lower than a power boiler's?

Water in the liquor, the endothermic reduction to sulphide and smelt heat losses.

What heating value has black liquor?

About 13.5–15 MJ/kg dry solids for softwood kraft.

How much steam per tonne of solids?

About 3–4 t of high-pressure steam.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.