Worked example
Example: 45 % to 92 %, 1000 t/d. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Dryness after the press section | 45.000 % |
| Dryness at the reel | 92.000 % |
| Paper production (at reel dryness) | 1,000.0 t/d |
Applying the formula below gives:
| Result | Value |
|---|---|
| Water evaporated per tonne of paper | 1.0444 kg/kg |
| Evaporation | 43.519 t/h |
| Saving per +1 point of press dryness | 4.2553 % |
Open this example in the calculator and change any input.
Formula
\(E = \frac{d_{reel}}{d_{press}} - 1, \quad \dot E = E\,P, \quad \Delta E = \frac{E - E(d_{press} + 0.01)}{E}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(d_{press}\) | Dryness after the press section | - |
| \(d_{reel}\) | Dryness at the reel | - |
| \(P\) | Paper production (at reel dryness) | kg/s |
| \(E\) | Water evaporated per tonne of paper | kg/kg |
| \(\dot E\) | Evaporation | kg/s |
| \(\Delta E\) | Saving per +1 point of press dryness | - |
Method and standards
Water balance per tonne of paper at reel dryness.
Where it is used
- Press section upgrades.
- Dryer steam budgets.
Common mistakes
- Using moisture instead of dryness.
- Per tonne of OD fibre vs per tonne of paper.
Assumptions and limits
- No water added between press and reel.
- ΔE is the saving in water evaporated; dryer steam falls roughly in proportion.
References
- Smook
- Handbook for Pulp & Paper Technologists
- 3rd ed. (Angus Wilde, 2002)
- ch. 16.9 and 17 (pressing and drying; dryness definitions)
Questions and answers
How much water is evaporated?
At 45 % press dryness and 92 % reel dryness, about 1.04 t per tonne of paper.
Why does a point matter so much?
Evaporation falls by about 4–5 % per point of press dryness.
What raises press dryness?
Shoe presses, steam boxes and hotter sheets.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.