Worked example
Example: 80 g/m2 copy paper. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Grammage | 80.000 g/m² |
| Tensile strength (force per width) | 5.5000 kN/m |
| Burst pressure | 250.00 kPa |
| Tearing resistance | 0.65000 N |
Applying the formula below gives:
| Result | Value |
|---|---|
| Tensile index, N·m/g | 68.750 |
| Burst index, kPa·m²/g | 3.1250 |
| Tear index, mN·m²/g | 8.1250 |
| Breaking length | 7.0105 km |
Open this example in the calculator and change any input.
Formula
\(TI = \frac{T\ [\mathrm{N/m}]}{G\ [\mathrm{g/m^2}]}, \quad BI = \frac{p_b\ [\mathrm{kPa}]}{G\ [\mathrm{g/m^2}]}, \quad TrI = \frac{F_t\ [\mathrm{mN}]}{G\ [\mathrm{g/m^2}]}, \quad BL = \frac{T}{Gg}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(G\) | Grammage | kg/m² |
| \(T\) | Tensile strength (force per width) | N/m |
| \(p_b\) | Burst pressure | Pa |
| \(F_t\) | Tearing resistance | N |
| \(TI\) | Tensile index, N·m/g | - |
| \(BI\) | Burst index, kPa·m²/g | - |
| \(TrI\) | Tear index, mN·m²/g | - |
| \(BL\) | Breaking length | m |
Method and standards
Index definitions.
Where it is used
- Pulp evaluation and refining trials.
Common mistakes
- Mixing MD and CD values.
- Using g/m² with kN/m without conversion.
Assumptions and limits
- Conditioned samples (23 °C, 50 % RH).
- The indices use T in N/m, p_b in kPa, F_t in mN and G in g/m², giving N·m/g, kPa·m²/g and mN·m²/g; breaking length is in SI.
References
- Smook
- Handbook for Pulp & Paper Technologists
- 3rd ed. (Angus Wilde, 2002)
- ch. 22 (strength properties and indices)
Questions and answers
Why divide by grammage?
Heavier sheets are stronger simply because they hold more fibre; indices compare fibre quality.
What is breaking length?
The length of a strip that would break under its own weight: tensile index / g.
What units are used?
N·m/g for tensile, kPa·m²/g for burst and mN·m²/g for tear.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.