Worked example
Example: 0.9 % ClO2 on kappa 14. The inputs, in the units selected above:
| Input | Value |
|---|---|
| ClO₂ charge on OD pulp | 0.90000 % |
| Elemental chlorine charge on OD pulp | 0 % |
| Kappa number entering the stage | 14.000 - |
| Pulp production (oven-dry) | 500.00 t/d |
Applying the formula below gives:
| Result | Value |
|---|---|
| Active chlorine per kg ClO₂ | 2.6280 |
| Active chlorine charge | 2.3652 % |
| Kappa factor | 0.16894 |
| ClO₂ used | 187.50 kg/h |
Open this example in the calculator and change any input.
Formula
\(f = \frac{5M_{Cl}}{M_{ClO_2}} \approx 2.63, \quad c_{aCl} = f\,c_{ClO_2} + c_{Cl_2}, \quad KF = \frac{c_{aCl}(\%)}{\kappa}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(c_{ClO_2}\) | ClO₂ charge on OD pulp | - |
| \(c_{Cl_2}\) | Elemental chlorine charge on OD pulp | - |
| \(\kappa\) | Kappa number entering the stage | - |
| \(\dot m_{OD}\) | Pulp production (oven-dry) | kg/s |
| \(f\) | Active chlorine per kg ClO₂ | - |
| \(c_{aCl}\) | Active chlorine charge | - |
| \(KF\) | Kappa factor | - |
| \(\dot m_{ClO_2}\) | ClO₂ used | kg/s |
Method and standards
Electron-transfer equivalence and kappa factor definition.
Where it is used
- Bleach plant charge setting.
Common mistakes
- Confusing ClO₂ and active chlorine charges.
- Using kappa after the stage.
Assumptions and limits
- Charges on OD pulp.
References
- Smook
- Handbook for Pulp & Paper Technologists
- 3rd ed. (Angus Wilde, 2002)
- ch. 11 (bleaching with chlorine dioxide)
- Active chlorine equivalence from electron transfer: ClO₂ (5 e⁻) against Cl₂ (2 e⁻)
Questions and answers
Why convert to active chlorine?
It puts ClO₂ and chlorine on one oxidising basis for comparing stages.
What kappa factor is typical?
0.18–0.25 for a D₀ stage.
Where does 2.63 come from?
5 × 35.45/67.45: five electrons per ClO₂, two per Cl₂.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.