Worked example
Example: 1000 t at 50 % dry. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Wet mass weighed | 1,000.0 t |
| Dryness (dry solids share) | 50.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Oven-dry mass | 500.00 t |
| Air-dry mass (90 % dry) | 555.56 t |
| Water in the wet mass | 500.00 t |
Open this example in the calculator and change any input.
Formula
\(M_{OD} = M d, \quad M_{AD} = \frac{M_{OD}}{0.9}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(M\) | Wet mass weighed | kg |
| \(d\) | Dryness (dry solids share) | - |
| \(M_{OD}\) | Oven-dry mass | kg |
| \(M_{AD}\) | Air-dry mass (90 % dry) | kg |
| \(M_w\) | Water in the wet mass | kg |
Method and standards
Trade definitions.
Where it is used
- Pulp sales and shipping.
- Production reporting.
Common mistakes
- Confusing dryness with moisture.
- Using metric and short tons together.
Assumptions and limits
- 90 % air-dry convention.
References
- Smook
- Handbook for Pulp & Paper Technologists
- 3rd ed. (Angus Wilde, 2002)
- ch. 8: an air-dry ton is 90 % bone-dry fibre and 10 % water
Questions and answers
Why 90 %?
It is the trade convention for market pulp; Smook notes pulp is commonly made at 90–95 % dry.
Is oven-dry the same as bone-dry?
Yes.
How is dryness measured?
By drying a sample at 105 °C to constant weight.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.