Worked example
Example: Hugot example. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Fibre per unit cane | 15.000 % |
| Imbibition water per unit cane | 36.000 % |
| Brix of primary (first-mill) juice | 20.730 % |
| Purity of first-mill juice | 89.000 % |
| Extraction | 96.000 % |
| Purity of residual juice in the final bagasse | 50.000 % |
| Fibre in first-mill bagasse | 33.000 % |
| Fibre in final bagasse | 50.000 % |
| Brix ratio absolute / primary juice | 0.96500 - |
| Purity ratio absolute / primary juice | 0.96000 - |
Applying the formula below gives:
| Result | Value |
|---|---|
| Brix of absolute juice | 20.004 % |
| Sucrose per unit cane | 14.528 % |
| Sucrose in first-mill juice per unit cane | 10.063 % |
| Sucrose in final bagasse per unit cane | 0.58112 % |
| Sucrose % final bagasse | 1.9371 % |
| Second-mill juice per unit cane | 51.455 % |
| Brix of second-mill juice | 8.8122 % |
| Sucrose % second-mill juice | 7.5473 % |
| Purity of second-mill juice | 85.646 % |
Open this example in the calculator and change any input.
Formula
\(B_0 = k_B B_1, \quad s_0 = (1 - f)B_0\,k_p p_1, \quad s_1 = (1 - b_1)B_1 p_1, \quad s_n = s_0(1 - e)\)
\(j_2 = 1 + w - b_n - j_1, \quad B_2 = \frac{M_0 - M_1 - s_n/p_n}{j_2}, \quad p_2 = \frac{s_0 - s_1 - s_n}{M_0 - M_1 - s_n/p_n}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(f\) | Fibre per unit cane | - |
| \(w\) | Imbibition water per unit cane | - |
| \(B_1\) | Brix of primary (first-mill) juice | - |
| \(p_1\) | Purity of first-mill juice | - |
| \(e\) | Extraction | - |
| \(p_n\) | Purity of residual juice in the final bagasse | - |
| \(F_1\) | Fibre in first-mill bagasse | - |
| \(F_n\) | Fibre in final bagasse | - |
| \(k_B\) | Brix ratio absolute / primary juice | - |
| \(k_p\) | Purity ratio absolute / primary juice | - |
| \(B_0\) | Brix of absolute juice | - |
| \(s_0\) | Sucrose per unit cane | - |
| \(s_1\) | Sucrose in first-mill juice per unit cane | - |
| \(s_n\) | Sucrose in final bagasse per unit cane | - |
| \(\sigma\) | Sucrose % final bagasse | - |
| \(j_2\) | Second-mill juice per unit cane | - |
| \(B_2\) | Brix of second-mill juice | - |
| \(S_2\) | Sucrose % second-mill juice | - |
| \(p_2\) | Purity of second-mill juice | - |
Method and standards
Hugot's step-by-step balance of soluble matter and sucrose.
Where it is used
- Checking mill juice analyses.
- Teaching and auditing milling balances.
Common mistakes
- Mixing pol and sucrose.
- Using fibre % cane for bagasse fibre.
Assumptions and limits
- Compound imbibition; only mills 1 and 2 send juice to process.
- Sucrose and purity are apparent values (pol), as in factory control. The defaults for k_B and k_p are typical ratios, not from a cited source: use your own.
- A second-mill juice with negative sucrose or purity above 100 % is rejected.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 19
- material balance of the tandem
- pp. 299–303
Questions and answers
Why is absolute juice brix below primary juice brix?
The first expressed juice is richer than the average juice in cane; Hugot takes B₀ = 0.965 B₁.
How is sucrose in bagasse found?
From the extraction: what is not extracted stays in the final bagasse.
Why does second-mill juice have lower purity?
Later pressings expel juice from inner cells, which is poorer, diluted by returned imbibition juice.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.