Worked example
Example: Hugot five-mill example. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Fibre per unit cane | 15.000 % |
| Imbibition water per unit cane | 36.000 % |
| Number of mills | 5.0000 - |
| Fibre in bagasse from mill 1 | 33.000 % |
| Fibre in bagasse from mill 2 | 40.000 % |
| Fibre in bagasse from mill 3 | 44.000 % |
| Fibre in bagasse from mill 4 | 47.000 % |
| Fibre in bagasse from mill 5 | 50.000 % |
| Fibre in bagasse from mill 6 | 52.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Bagasse from mill 1 per unit cane | 45.455 % |
| Bagasse from mill 2 per unit cane | 37.500 % |
| Bagasse from mill 3 per unit cane | 34.091 % |
| Bagasse from mill 4 per unit cane | 31.915 % |
| Bagasse from mill 5 per unit cane | 30.000 % |
| Bagasse from mill 6 per unit cane | 0 % |
| Juice from mill 1 per unit cane | 54.545 % |
| Juice from mill 2 per unit cane | 51.455 % |
| Juice from mill 3 per unit cane | 43.500 % |
| Juice from mill 4 per unit cane | 40.091 % |
| Juice from mill 5 per unit cane | 37.915 % |
| Juice from mill 6 per unit cane | 0 % |
| Mixed juice per unit cane | 106.00 % |
Open this example in the calculator and change any input.
Formula
\(b_i = \frac{f}{F_i}, \quad Q = 1 + w - b_N, \quad j_1 = 1 - b_1, \quad j_i = b_{i-1} + w - b_N\ (i \ge 2)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(f\) | Fibre per unit cane | - |
| \(w\) | Imbibition water per unit cane | - |
| \(N\) | Number of mills | - |
| \(F_1\) | Fibre in bagasse from mill 1 | - |
| \(F_2\) | Fibre in bagasse from mill 2 | - |
| \(F_3\) | Fibre in bagasse from mill 3 | - |
| \(F_4\) | Fibre in bagasse from mill 4 | - |
| \(F_5\) | Fibre in bagasse from mill 5 | - |
| \(F_6\) | Fibre in bagasse from mill 6 | - |
| \(b_1\) | Bagasse from mill 1 per unit cane | - |
| \(b_2\) | Bagasse from mill 2 per unit cane | - |
| \(b_3\) | Bagasse from mill 3 per unit cane | - |
| \(b_4\) | Bagasse from mill 4 per unit cane | - |
| \(b_5\) | Bagasse from mill 5 per unit cane | - |
| \(b_6\) | Bagasse from mill 6 per unit cane | - |
| \(j_1\) | Juice from mill 1 per unit cane | - |
| \(j_2\) | Juice from mill 2 per unit cane | - |
| \(j_3\) | Juice from mill 3 per unit cane | - |
| \(j_4\) | Juice from mill 4 per unit cane | - |
| \(j_5\) | Juice from mill 5 per unit cane | - |
| \(j_6\) | Juice from mill 6 per unit cane | - |
| \(Q\) | Mixed juice per unit cane | - |
Method and standards
Hugot's mass balance with chokeless return of intermediate juices.
Where it is used
- Sizing juice pumps and screens.
- Understanding juice circulation in the tandem.
Common mistakes
- Using fibre % cane for F.
- Forgetting the returned juice in pump sizing.
Assumptions and limits
- Compound imbibition with all fine bagasse returned.
- Q = 1 + w − b_N is the mixed juice, taken as the juice of mills 1 and 2 only; intermediate juices return as imbibition.
- Fibre in bagasse must not fall along the tandem, and no juice flow may be negative.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 19
- relative weights of bagasse and juice
- pp. 297–299 (example f 0.15, w 0.36)
Questions and answers
Why is the juice of the first mill largest?
It extracts most of the juice before any water is added: one minus its bagasse.
Where does w go?
It enters before the last mill; with compound imbibition each mill's juice goes back before the previous mill.
What is Q?
Mixed juice to process: cane plus water minus final bagasse.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.