FireCADCalc

Reduced Extraction Corrected for Sugar Content

Reduced mill extraction corrected for both fibre and sugar in cane: Ugale (eqn 20.8), Rein (20.9), and Deerr and Mittal with Rein's correction (20.15–20.16).

Sugar mill and cogeneration

Inputs

Examples: Rein standard basisPoor cane

Results

Rich cane extracts more easily; these forms put rich and poor cane on a common footing. Rein's correction is much larger than Ugale's.

Ugale (Deerr × 7.125/(7 + P))96.039%
Rein, standard 15.5 % fibre and 13 % pol95.001%
Deerr with Rein's sugar correction96.013%
Mittal with Rein's sugar correction95.872%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Rein standard basis. The inputs, in the units selected above:

InputValue
Actual pol extraction95.000 %
Fibre % cane15.500 %
Pol % cane13.000 %
Sucrose % cane13.000 %

Applying the formula below gives:

ResultValue
Ugale (Deerr × 7.125/(7 + P))96.039 %
Rein, standard 15.5 % fibre and 13 % pol95.001 %
Deerr with Rein's sugar correction96.013 %
Mittal with Rein's sugar correction95.872 %

Open this example in the calculator and change any input.

Formula

\(E_{Ugale} = \left[1 - \frac{(1 - e)(1 - f)}{7f}\right]\frac{7.125}{7 + P}, \quad E_{Rein} = 1 - 0.1834\frac{(1 - e)(1 - f)}{f}\left(\frac{P}{13}\right)^{0.6}\)

\(E_{D,R} = 1 - \frac{(1 - e)(1 - f)}{7f}\left(\frac{r}{12.5}\right)^{0.6}, \quad E_{M,R} = 1 - \frac{0.125(1 - e)}{f}\left(\frac{r}{12.5}\right)^{0.6}\)

Variables

Symbol Meaning SI unit
\(e\) Actual pol extraction -
\(f\) Fibre % cane -
\(P\) Pol % cane -
\(r\) Sucrose % cane -
\(E_{Ugale}\) Ugale (Deerr × 7.125/(7 + P)) -
\(E_{Rein}\) Rein, standard 15.5 % fibre and 13 % pol -
\(E_{D,R}\) Deerr with Rein's sugar correction -
\(E_{M,R}\) Mittal with Rein's sugar correction -

Method and standards

Formulae as given by Hugot (P per unit cane in Ugale's form; P and r in percent in the Rein forms).

Where it is used

  • Comparing mills crushing cane of different richness.
  • Season reports across factories.

Common mistakes

  • Mixing pol and sucrose.
  • Using percentages where fractions are meant.

Assumptions and limits

  • Corrections are empirical; for very low extraction and fibre they can come out negative, which is flagged.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 20
  • eqns 20.8–20.10 and 20.15–20.16
  • pp. 318–321

Questions and answers

Why correct for sugar content?

The juice that pressure cannot extract is about the same in rich and poor cane, so rich cane shows a better extraction for the same mill work.

Which correction is better founded?

Hugot judges Rein's, which agrees with Tongaat experience of about 0.2 points per point of sugar.

Standard bases?

Ugale and the Rein forms of Deerr and Mittal use 12.5 % fibre and 12.5 % sugar; Rein's own form uses 15.5 % fibre and 13 % pol.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.