Worked example
Example: Rein standard basis. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Actual pol extraction | 95.000 % |
| Fibre % cane | 15.500 % |
| Pol % cane | 13.000 % |
| Sucrose % cane | 13.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Ugale (Deerr × 7.125/(7 + P)) | 96.039 % |
| Rein, standard 15.5 % fibre and 13 % pol | 95.001 % |
| Deerr with Rein's sugar correction | 96.013 % |
| Mittal with Rein's sugar correction | 95.872 % |
Open this example in the calculator and change any input.
Formula
\(E_{Ugale} = \left[1 - \frac{(1 - e)(1 - f)}{7f}\right]\frac{7.125}{7 + P}, \quad E_{Rein} = 1 - 0.1834\frac{(1 - e)(1 - f)}{f}\left(\frac{P}{13}\right)^{0.6}\)
\(E_{D,R} = 1 - \frac{(1 - e)(1 - f)}{7f}\left(\frac{r}{12.5}\right)^{0.6}, \quad E_{M,R} = 1 - \frac{0.125(1 - e)}{f}\left(\frac{r}{12.5}\right)^{0.6}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(e\) | Actual pol extraction | - |
| \(f\) | Fibre % cane | - |
| \(P\) | Pol % cane | - |
| \(r\) | Sucrose % cane | - |
| \(E_{Ugale}\) | Ugale (Deerr × 7.125/(7 + P)) | - |
| \(E_{Rein}\) | Rein, standard 15.5 % fibre and 13 % pol | - |
| \(E_{D,R}\) | Deerr with Rein's sugar correction | - |
| \(E_{M,R}\) | Mittal with Rein's sugar correction | - |
Method and standards
Formulae as given by Hugot (P per unit cane in Ugale's form; P and r in percent in the Rein forms).
Where it is used
- Comparing mills crushing cane of different richness.
- Season reports across factories.
Common mistakes
- Mixing pol and sucrose.
- Using percentages where fractions are meant.
Assumptions and limits
- Corrections are empirical; for very low extraction and fibre they can come out negative, which is flagged.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 20
- eqns 20.8–20.10 and 20.15–20.16
- pp. 318–321
Questions and answers
Why correct for sugar content?
The juice that pressure cannot extract is about the same in rich and poor cane, so rich cane shows a better extraction for the same mill work.
Which correction is better founded?
Hugot judges Rein's, which agrees with Tongaat experience of about 0.2 points per point of sugar.
Standard bases?
Ugale and the Rein forms of Deerr and Mittal use 12.5 % fibre and 12.5 % sugar; Rein's own form uses 15.5 % fibre and 13 % pol.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.