Worked example
Example: Hugot example: 120 TCH on 813 x 1675. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Crushing rate | 120.00 t/h |
| Fibre % cane | 14.000 % |
| Roller diameter | 0.81300 m |
| Roller length | 1.6750 m |
| Fibre loading for a 762 mm roller | 157.00 g/dm² |
| Fibre index at the delivery opening | 800.00 kg/m³ |
| Lift / working delivery opening | 30.000 % |
| Top roller angle (between the two openings) | 73.740 ° |
| Corrections to the delivery setting (wear, etc.) | 4.0000 mm |
| Feed / delivery working ratio | 1.9000 - |
| Corrections to the feed setting | 6.0000 mm |
Applying the formula below gives:
| Result | Value |
|---|---|
| Fibre loading for this diameter | 167.51 g/dm² |
| Roller speed | 3.9072 rpm |
| Working delivery opening | 20.938 mm |
| Opening gained by the lift | 5.0252 mm |
| Empty delivery setting | 11.913 mm |
| Working feed opening | 39.783 mm |
| Empty feed setting | 28.758 mm |
Open this example in the calculator and change any input.
Formula
\(q = q_{762}\frac{D}{0.762\ \mathrm{m}}, \quad n = \frac{A f}{\pi D L q}, \quad e_A = \frac{q}{\varphi}, \quad \Delta e = \lambda e_A\cos\frac{\alpha}{2}\)
\(s_0 = e_A - \Delta e - k_d, \quad E_A = m\,e_A, \quad E_0 = E_A - \Delta e - k_f\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(A\) | Crushing rate | kg/s |
| \(f\) | Fibre % cane | - |
| \(D\) | Roller diameter | m |
| \(L\) | Roller length | m |
| \(q_{762}\) | Fibre loading for a 762 mm roller | kg/m² |
| \(\varphi\) | Fibre index at the delivery opening | kg/m³ |
| \(\lambda\) | Lift / working delivery opening | - |
| \(\alpha\) | Top roller angle (between the two openings) | rad |
| \(k_d\) | Corrections to the delivery setting (wear, etc.) | m |
| \(m\) | Feed / delivery working ratio | - |
| \(k_f\) | Corrections to the feed setting | m |
| \(q\) | Fibre loading for this diameter | kg/m² |
| \(n\) | Roller speed | 1/s |
| \(e_A\) | Working delivery opening | m |
| \(\Delta e\) | Opening gained by the lift | m |
| \(s_0\) | Empty delivery setting | m |
| \(E_A\) | Working feed opening | m |
| \(E_0\) | Empty feed setting | m |
Method and standards
Hugot's account of the Java method.
Where it is used
- Setting mills for the season.
- Recomputing settings after a change in crush rate or roller size.
Common mistakes
- Mixing g/dm² and kg/m² (1 g/dm² = 0.1 kg/m²).
- Using the empty setting as the working opening.
Assumptions and limits
- Vertical housings; table values for the mill position. For inclined housings correct the openings with the mill inclined housing calculator.
- A note compares the roller speed with Hugot's maximal speed 10.5/(D + 0.73) rpm.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 13
- Java method
- pp. 201–204 (example of 15 rollers 813 × 1675 mm at 120 t/h)
Questions and answers
What is the fibre index?
Grams of fibre per litre of space generated by the working opening; it rises along the tandem as bagasse is squeezed harder.
Why scale the fibre loading by D/762?
The Java tables are for 762 mm rollers; larger rollers carry proportionally thicker blankets.
Why subtract the lift?
Under load the top roller rises; the empty setting must be smaller by the opening that the lift adds.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.