Worked example
Example: Six-mill tandem. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Pol % cane | 13.500 % |
| Fibre % cane | 14.600 % |
| Pol % bagasse from mill 1 (0 if none) | 10.500 % |
| Fibre % bagasse from mill 1 | 33.000 % |
| Pol % bagasse from mill 2 (0 if none) | 6.0000 % |
| Fibre % bagasse from mill 2 | 40.000 % |
| Pol % bagasse from mill 3 (0 if none) | 3.8000 % |
| Fibre % bagasse from mill 3 | 44.000 % |
| Pol % bagasse from mill 4 (0 if none) | 2.8000 % |
| Fibre % bagasse from mill 4 | 47.000 % |
| Pol % bagasse from mill 5 (0 if none) | 2.1000 % |
| Fibre % bagasse from mill 5 | 49.000 % |
| Pol % bagasse from mill 6 (0 if none) | 1.6000 % |
| Fibre % bagasse from mill 6 | 50.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Unit extraction of mill 1 | 65.589 % |
| Unit extraction of mill 2 | 52.857 % |
| Unit extraction of mill 3 | 42.424 % |
| Unit extraction of mill 4 | 31.019 % |
| Unit extraction of mill 5 | 28.061 % |
| Unit extraction of mill 6 | 25.333 % |
| Cumulative extraction to mill 1 | 65.589 % |
| Cumulative extraction to mill 2 | 83.778 % |
| Cumulative extraction to mill 3 | 90.660 % |
| Cumulative extraction to mill 4 | 93.557 % |
| Cumulative extraction to mill 5 | 95.365 % |
| Cumulative extraction to mill 6 | 96.539 % |
Open this example in the calculator and change any input.
Formula
\(e_1 = 1 - \frac{S_1 f}{S_0 f_1}, \quad e_n = 1 - \frac{S_n}{S_{n-1}}\cdot\frac{f_{n-1}}{f_n}, \quad E_n = 1 - \prod_{i \le n}(1 - e_i)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(S_0\) | Pol % cane | - |
| \(f\) | Fibre % cane | - |
| \(S_1\) | Pol % bagasse from mill 1 (0 if none) | - |
| \(f_1\) | Fibre % bagasse from mill 1 | - |
| \(S_2\) | Pol % bagasse from mill 2 (0 if none) | - |
| \(f_2\) | Fibre % bagasse from mill 2 | - |
| \(S_3\) | Pol % bagasse from mill 3 (0 if none) | - |
| \(f_3\) | Fibre % bagasse from mill 3 | - |
| \(S_4\) | Pol % bagasse from mill 4 (0 if none) | - |
| \(f_4\) | Fibre % bagasse from mill 4 | - |
| \(S_5\) | Pol % bagasse from mill 5 (0 if none) | - |
| \(f_5\) | Fibre % bagasse from mill 5 | - |
| \(S_6\) | Pol % bagasse from mill 6 (0 if none) | - |
| \(f_6\) | Fibre % bagasse from mill 6 | - |
| \(e_1\) | Unit extraction of mill 1 | - |
| \(e_2\) | Unit extraction of mill 2 | - |
| \(e_3\) | Unit extraction of mill 3 | - |
| \(e_4\) | Unit extraction of mill 4 | - |
| \(e_5\) | Unit extraction of mill 5 | - |
| \(e_6\) | Unit extraction of mill 6 | - |
| \(E_1\) | Cumulative extraction to mill 1 | - |
| \(E_2\) | Cumulative extraction to mill 2 | - |
| \(E_3\) | Cumulative extraction to mill 3 | - |
| \(E_4\) | Cumulative extraction to mill 4 | - |
| \(E_5\) | Cumulative extraction to mill 5 | - |
| \(E_6\) | Cumulative extraction to mill 6 | - |
Method and standards
Hugot's pol balance with constant fibre.
Where it is used
- Mill-by-mill performance checks.
- Finding the mill that under-performs.
Common mistakes
- Using pol % juice instead of pol % bagasse.
- Mixing per-cane and per-bagasse fibre.
Assumptions and limits
- Constant fibre through the mills.
- Mills not entered are not shown. A negative unit extraction (pol per fibre rising) is flagged as a likely sampling error.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 21
- eqns 21.4–21.5 and Table 21.1
- pp. 330–331
Questions and answers
Why use bagasse analyses?
Hugot prefers them: pol and fibre of each bagasse give each mill's extraction without weighing juices.
What is unit extraction?
The share of the pol entering a mill that the mill removes; later mills show lower values because imbibition juice returns.
Assumption?
Fibre passes unchanged through each mill; a little fine bagasse escapes with the juice.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.