Worked example
Example: Last mill. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Brix of feed-roller juice | 4.5000 % |
| Brix of delivery-roller juice | 6.5000 % |
| Brix of the mill's juice | 5.0000 % |
| Juice from the mill | 60.000 t/h |
Applying the formula below gives:
| Result | Value |
|---|---|
| Share of juice from the feed roller | 75.000 % |
| Feed-roller juice | 45.000 t/h |
| Delivery-roller juice | 15.000 t/h |
Open this example in the calculator and change any input.
Formula
\(x = \frac{S - M}{S - E}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(E\) | Brix of feed-roller juice | - |
| \(S\) | Brix of delivery-roller juice | - |
| \(M\) | Brix of the mill's juice | - |
| \(\dot m_j\) | Juice from the mill | kg/s |
| \(x\) | Share of juice from the feed roller | - |
| \(\dot m_f\) | Feed-roller juice | kg/s |
| \(\dot m_d\) | Delivery-roller juice | kg/s |
Method and standards
Brix balance of the two roller juices.
Where it is used
- Checking individual mill work.
- Setting feed openings.
Common mistakes
- Sampling juices at different times.
- Including returned juice in the samples.
Assumptions and limits
- Juice samples taken together under steady load.
- The share is very sensitive to brix errors when the feed and delivery brixes are close, as they often are at the last mills; a note gives the sensitivity, and another compares the share with Hawaii's 70–80 %.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 21
- eqn 21.16
- p. 337
Questions and answers
Why should the feed roller give most of the juice?
It squeezes out the imbibition water on the outside of the bagasse; the delivery roller works on the inner cells.
Why is feed juice weaker in wet mills?
It is mostly the water just added; delivery juice comes from inside the cells and is richer.
What if x is low?
Check the feed opening and trashplate, and how the imbibition is applied.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.