FireCADCalc

Juice Brix along Compound Imbibition (Hugot)

Expected brix of the juice from each wet-crushing mill with compound imbibition from the normal juice brix, imbibition on fibre and number of wet mills (eqn 19.19).

Sugar mill and cogeneration

Inputs

Examples: Four wet millsThree wet mills, lambda 3Five wet mills

Results

Measured brixes far below these values show a mill not extracting its share; compare them with the brix curve of the tandem.

Imbibition per unit fibre2.5000
Brix of juice from wet mill 16.7580%
Brix of juice from wet mill 22.6613%
Brix of juice from wet mill 31.0226%
Brix of juice from wet mill 40.36707%
Brix of juice from wet mill 50.10488%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Four wet mills. The inputs, in the units selected above:

InputValue
Brix of normal (dry-crushing) juice18.000 %
Fibre per unit cane15.000 %
Imbibition water per unit cane30.000 %
Number of wet-crushing mills4.0000 -

Applying the formula below gives:

ResultValue
Imbibition per unit fibre2.0000
Brix of juice from wet mill 18.7097 %
Brix of juice from wet mill 24.0645 %
Brix of juice from wet mill 31.7419 %
Brix of juice from wet mill 40.58065 %

Open this example in the calculator and change any input.

Formula

\(\lambda = \frac{w}{f}, \quad B_p = B_0\,\frac{\lambda^{n-p+1} - 1}{\lambda^{n+1} - 1}\)

Variables

Symbol Meaning SI unit
\(B_0\) Brix of normal (dry-crushing) juice -
\(f\) Fibre per unit cane -
\(w\) Imbibition water per unit cane -
\(n\) Number of wet-crushing mills -
\(\lambda\) Imbibition per unit fibre -
\(B_1\) Brix of juice from wet mill 1 -
\(B_2\) Brix of juice from wet mill 2 -
\(B_3\) Brix of juice from wet mill 3 -
\(B_4\) Brix of juice from wet mill 4 -
\(B_5\) Brix of juice from wet mill 5 -

Method and standards

Hugot's theory of compound imbibition with complete mixing.

Where it is used

  • Mill control with brix curves.
  • Spotting a poorly working mill.

Common mistakes

  • Counting the dry-crushing mills among the wet mills.
  • Using % on cane for λ.

Assumptions and limits

  • Complete mixing; equal purities.
  • Outputs are shown only for the wet mills that exist.
  • This is Hugot's simple form with the imbibition ratio taken as w/f. The imbibition extraction theory calculator corrects the ratio for the fibre in bagasse and an imbibition efficiency, so the two can show different brix and extraction trends; use that one for extraction.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 19
  • eqns 19.17–19.19
  • pp. 294–297; brix graphs
  • ch. 21
  • p. 331

Questions and answers

What is a brix curve?

Brix of the juice of successive mills; a regular fall shows each mill doing its work, a kink shows one that is not.

Why does brix fall geometrically?

With compound imbibition each juice is diluted by the juice returned from the next mill; the ratio depends on λ.

Purity effect?

Hugot assumes equal purities; real juices lose a little purity along the tandem.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.