FireCADCalc

Factory Efficiency Coefficient k (Hugot)

Hugot's coefficient k relating sugar made to fibre, pol and brix of juice (eqns 21.31–21.34), and the recoverable sugar from a cane analysis with a known k.

Sugar mill and cogeneration

Inputs

Examples: Hugot k_A exampleHugot farmers' k example

Primary juice for k_U and k_P; calculated absolute juice for k_A.
Hugot normal values: k_P 1.32–1.40, k_U 1.34–1.42, k_C 1.36–1.44, k_A 1.40–1.53.

Results

k must be on the same juice basis as S and B (primary, crusher, mixed or absolute juice): k_A on absolute juice runs about 0.1 above k_U on primary juice.

Cane quality term9.6252%
Efficiency coefficient from the yield1.1948
Recoverable sugar % cane with the known k13.379%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Hugot k_A example. The inputs, in the units selected above:

InputValue
Fibre per unit cane13.400 %
Pol (sucrose) % juice14.540 %
Brix % juice17.360 %
Sugar made % cane10.820 %
Known coefficient for the recoverable sugar1.3900 -

Applying the formula below gives:

ResultValue
Cane quality term7.2687 %
Efficiency coefficient from the yield1.4886
Recoverable sugar % cane with the known k10.103 %

Open this example in the calculator and change any input.

Formula

\(X = k(1 - 1.65f)(S - 0.3B), \quad k = \frac{\rho}{(1 - 1.65f)(S - 0.3B)}\)

Variables

Symbol Meaning SI unit
\(f\) Fibre per unit cane -
\(S\) Pol (sucrose) % juice -
\(B\) Brix % juice -
\(\rho\) Sugar made % cane -
\(k\) Known coefficient for the recoverable sugar -
\((1 - 1.65f)(S - 0.3B)\) Cane quality term -
\(X\) Recoverable sugar % cane with the known k -

Method and standards

Hugot's coefficient derived from the losses in bagasse and molasses.

Where it is used

  • Valuing cane lots and varieties.
  • Season factory performance.

Common mistakes

  • Mixing primary and absolute juice analyses.
  • Entering yields as percent numbers.

Assumptions and limits

  • Standard losses folded into k.
  • S and B and the known k must refer to the same juice (primary, crusher, mixed or absolute); the forms of k differ by a few points.
  • Hugot's examples: f 0.134, B_A 17.36, S_A 14.54 and 10.82 % yield give k_A = 1.4886; k 1.39 with f 0.136, B 21.40, S 18.83 gives 13.38 % recoverable.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 21
  • eqns 21.25–21.34 and Table 21.3
  • pp. 342–350

Questions and answers

Where do 1.65 and 0.3 come from?

1.65 f approximates the bagasse loss at a standard extraction; 0.3 B is the molasses loss at a standard molasses purity (about 29).

Which forms of k?

Planters' k_P on fresh cane, factory k_U on primary juice, k_C on mixed-juice purity and k_A on absolute juice; they differ by a few points.

What is a good k?

Hugot: 1.38–1.42 in well-run factories on primary juice; 1.47–1.53 on absolute juice.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.