FireCADCalc

Overall Recovery and Sugar % Cane

Overall recovery from mill extraction and boiling house recovery, and sugar made % cane and per day from pol % cane and the crush.

Sugar mill and cogeneration

Inputs

Examples: 5000 TCD2500 TCD

Results

Overall recovery84.995%
Sugar % cane11.509%
Sugar made per day575.44t/d

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 5000 TCD. The inputs, in the units selected above:

InputValue
Mill extraction95.500 %
Boiling house recovery89.000 %
Pol % cane13.500 %
Pol % sugar99.700 %
Cane crushed per day5,000.0 t/d

Applying the formula below gives:

ResultValue
Overall recovery84.995 %
Sugar % cane11.509 %
Sugar made per day575.44 t/d

Open this example in the calculator and change any input.

Formula

\(OR = ME \cdot BHR, \quad R = \frac{Pol_c\,OR}{Pol_S}, \quad \dot m_S = TCD\,R\)

Variables

Symbol Meaning SI unit
\(ME\) Mill extraction -
\(BHR\) Boiling house recovery -
\(Pol_c\) Pol % cane -
\(Pol_S\) Pol % sugar -
\(TCD\) Cane crushed per day kg/s
\(OR\) Overall recovery -
\(R\) Sugar % cane -
\(\dot m_S\) Sugar made per day kg/s

Method and standards

Definitions.

Where it is used

  • Season planning.
  • Daily report.

Common mistakes

  • Using pol % cane from cane payment analysis without correction.

Assumptions and limits

  • Pol basis.

References

  • Sugar factory chemical control (daily manufacturing report) definitions
  • as compiled in SugarProcessTech
  • Formulas for calculating sugar industry DMR

Questions and answers

Why multiply the two recoveries?

The mill delivers a share of pol to the boiling house, which recovers a share of that.

Recovery % cane vs overall recovery?

Recovery % cane is sugar per 100 of cane; overall recovery is a share of pol in cane.

Which raises it more?

Usually extraction early in a season and boiling house work late.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.