FireCADCalc

Boiling House Recovery: Actual, Basic and Reduced (Noël Deerr)

Actual boiling house recovery, basic BHR at 28.57 molasses purity and Noël Deerr's reduced BHR to 85 purity from juice purity and sugar made.

Sugar mill and cogeneration

Inputs

Examples: TypicalHigh purity juice

Results

Reduced BHR removes the effect of juice purity so seasons and factories compare.

The actual BHR is well below the basic BHR: losses or stock changes are large, or an input is off.

Actual boiling house recovery84.362%
Basic BHR (molasses purity 28.57)92.381%
Virtual molasses purity45.086%
Reduced BHR to 85 juice purity (Noël Deerr)85.511%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Typical. The inputs, in the units selected above:

InputValue
Mixed juice purity84.000 %
Pol in mixed juice % cane13.000 %
Sugar made % cane (recovery)11.000 %
Pol % sugar99.700 %

Applying the formula below gives:

ResultValue
Actual boiling house recovery84.362 %
Basic BHR (molasses purity 28.57)92.381 %
Virtual molasses purity45.086 %
Reduced BHR to 85 juice purity (Noël Deerr)85.511 %

Open this example in the calculator and change any input.

Formula

\(BHR = \frac{Pol_S\,R}{Pol_{MJ,c}}, \quad BBHR = \frac{J - 0.2857}{J\,(1 - 0.2857)}\)

\(M_v = \frac{J (1 - BHR)}{1 - BHR\,J}, \quad R_{85} = \frac{0.85 - M_v}{0.85\,(1 - M_v)}\)

Variables

Symbol Meaning SI unit
\(J\) Mixed juice purity -
\(Pol_{MJ,c}\) Pol in mixed juice % cane -
\(R\) Sugar made % cane (recovery) -
\(Pol_S\) Pol % sugar -
\(BHR\) Actual boiling house recovery -
\(BBHR\) Basic BHR (molasses purity 28.57) -
\(M_v\) Virtual molasses purity -
\(R_{85}\) Reduced BHR to 85 juice purity (Noël Deerr) -

Method and standards

Recovery definitions.

Where it is used

  • Boiling house performance reports.
  • Inter-factory comparison.

Common mistakes

  • Using clear juice pol for mixed juice.
  • Percent and fraction mixed.

Assumptions and limits

  • Purities as fractions.
  • The actual BHR uses the measured pol of the sugar, while M_v and R85 follow the standard form, which takes the sugar as pure (purity 100); the two bases are mixed as in the DMR practice.
  • A note appears when M_v exceeds 85 (negative R85) or the actual BHR is far below the basic BHR.

References

  • Basic BHR = 100 (J − 28.57)/[J (100 − 28.57)]
  • Noël Deerr reduced BHR: R85 = 100 (85 − Mv)/[85 (100 − Mv)]
  • Mv = 100 J (1 − R)/(100 − R J)
  • Sugar factory chemical control (daily manufacturing report) definitions
  • as compiled in SugarProcessTech
  • Formulas for calculating sugar industry DMR

Questions and answers

What is basic BHR?

The recovery the juice would give with a final molasses purity of 28.57, a fixed reference.

Why reduce BHR to 85 purity?

Higher juice purity gives higher recovery for the same work; reducing removes it.

What is virtual molasses purity?

The molasses purity that would explain the recovery actually achieved.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.