Worked example
Example: 1000 t raw sugar. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Raw sugar | 1,000.0 t |
| Raw sugar brix (dry substance) | 99.000 % |
| Raw sugar purity | 98.500 % |
| Final molasses purity | 36.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| SJM factor with S = 100 | 99.143 % |
| Equivalent standard granulated | 981.52 t |
Open this example in the calculator and change any input.
Formula
\(f_{ESG} = \frac{J - M}{J (1 - M)}, \quad ESG = M_r\,Bx_r\,f_{ESG}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(M_r\) | Raw sugar | kg |
| \(Bx_r\) | Raw sugar brix (dry substance) | - |
| \(J\) | Raw sugar purity | - |
| \(M\) | Final molasses purity | - |
| \(f_{ESG}\) | SJM factor with S = 100 | - |
| \(ESG\) | Equivalent standard granulated | kg |
Method and standards
SJM with S = 100.
Where it is used
- Inter-factory comparison.
- Raw sugar valuation studies.
Common mistakes
- Pol used for purity.
Assumptions and limits
- Apparent purities.
References
- SJM formula with S = 100 % (pure crystal)
- as used for ESG
- Sugar factory chemical control (daily manufacturing report) definitions
- as compiled in SugarProcessTech
- Formulas for calculating sugar industry DMR
Questions and answers
What does ESG mean?
The pure sugar the raw sugar's solids would yield if refined down to final molasses purity.
Why brix?
The factor applies to dry solids; raw sugar carries a little water.
Use?
Comparing factories that make raw and white sugar.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.