Worked example
Example: Defecation. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Mixed juice brix | 15.200 % |
| Mixed juice pol | 12.800 % |
| Clear juice brix | 15.000 % |
| Clear juice pol | 12.750 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Mixed juice purity | 84.211 % |
| Clear juice purity | 85.000 % |
| Purity rise | 0.78947 % |
| Non-sucrose removed (per unit pol) | 5.8824 % |
Open this example in the calculator and change any input.
Formula
\(P = \frac{Pol}{B}, \quad \Delta P = P_C - P_M, \quad \eta_{NS} = 1 - \frac{(B_C - Pol_C)/Pol_C}{(B_M - Pol_M)/Pol_M}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(B_M\) | Mixed juice brix | - |
| \(Pol_M\) | Mixed juice pol | - |
| \(B_C\) | Clear juice brix | - |
| \(Pol_C\) | Clear juice pol | - |
| \(P_M\) | Mixed juice purity | - |
| \(P_C\) | Clear juice purity | - |
| \(\Delta P\) | Purity rise | - |
| \(\eta_{NS}\) | Non-sucrose removed (per unit pol) | - |
Method and standards
Definitions.
Where it is used
- Daily clarification control.
- Comparing clarification methods.
Common mistakes
- Samples not matched in time.
- Mixing refractometric and hydrometer brix.
Assumptions and limits
- Sucrose passes clarification unchanged. A purity fall gives a negative rise and a negative removal (non-sucrose added, for example lime salts); a note then flags it.
References
- Definitions: purity = pol/brix; non-sucrose per unit pol
Questions and answers
Why per unit pol?
Clear juice is diluted by filtrate and lime water; comparing non-sucrose to pol cancels the dilution.
Is a purity rise always good?
Usually: it shows non-sugars removed. A large rise with high lime use may also mean sucrose losses elsewhere.
Sampling?
Mixed and clear juice samples must cover the same juice, offset by the clarifier residence time.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.