Worked example
Example: Equal 1 m disks 1 m apart (radius 0.5 m). The inputs, in the units selected above:
| Input | Value |
|---|---|
| Radius of disk i (emitter) | 0.50000 m |
| Radius of disk j (receiver) | 0.50000 m |
| Distance between the disks | 1.0000 m |
Applying the formula below gives:
| Result | Value |
|---|---|
| View factor from i to j | 0.17157 |
| View factor from j to i | 0.17157 |
Open this example in the calculator and change any input.
Formula
\(R_i = \frac{r_i}{L},\ R_j = \frac{r_j}{L},\ S = 1 + \frac{1 + R_j^2}{R_i^2}, \quad F_{ij} = \frac{1}{2}\left\{S - \left[S^2 - 4\left(\frac{r_j}{r_i}\right)^2\right]^{1/2}\right\}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(r_i\) | Radius of disk i (emitter) | m |
| \(r_j\) | Radius of disk j (receiver) | m |
| \(L\) | Distance between the disks | m |
| \(F_{ij}\) | View factor from i to j | - |
| \(F_{ji}\) | View factor from j to i | - |
Method and standards
Analytic view factor.
Where it is used
- Furnace openings and heaters.
- Radiation examinations.
Common mistakes
- Diameters for radii.
- Swapping i and j.
Assumptions and limits
The formula is evaluated as F = 2(r_j/r_i)²/[S + √(S² − 4(r_j/r_i)²)], algebraically the same as the textbook form but free of the cancellation that loses digits when the disks are close together.
Diffuse surfaces, coaxial and parallel.
References
- Incropera
- DeWitt
- Bergman and Lavine
- Fundamentals of Heat and Mass Transfer
- ch. 13
- Table 13.2 (coaxial parallel disks)
Questions and answers
Two disks of 2 m diameter, 1 m apart?
F = 0.38: 38 % of what leaves one strikes the other (0.17 for 1 m disks).
What is reciprocity?
A_i F_ij = A_j F_ji.
Why does spacing matter so much?
Radiation spreads; at large distance F falls with the square of distance.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.