FireCADCalc

View Factor Between Two Coaxial Parallel Disks

Radiation view factor from one disk to a coaxial parallel disk from their radii and spacing, and the reverse view factor by reciprocity.

Thermal power plantProcess steam and utilitiesRefinery and petrochemicalChemical and fertiliser

Inputs

Examples: Equal 1 m disks 1 m apart (radius 0.5 m)2 m disks 1 m apartSmall 0.2 m to large 1 m, 0.5 m apart

Results

View factor from i to j0.38197
View factor from j to i0.38197

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Equal 1 m disks 1 m apart (radius 0.5 m). The inputs, in the units selected above:

InputValue
Radius of disk i (emitter)0.50000 m
Radius of disk j (receiver)0.50000 m
Distance between the disks1.0000 m

Applying the formula below gives:

ResultValue
View factor from i to j0.17157
View factor from j to i0.17157

Open this example in the calculator and change any input.

Formula

\(R_i = \frac{r_i}{L},\ R_j = \frac{r_j}{L},\ S = 1 + \frac{1 + R_j^2}{R_i^2}, \quad F_{ij} = \frac{1}{2}\left\{S - \left[S^2 - 4\left(\frac{r_j}{r_i}\right)^2\right]^{1/2}\right\}\)

Variables

Symbol Meaning SI unit
\(r_i\) Radius of disk i (emitter) m
\(r_j\) Radius of disk j (receiver) m
\(L\) Distance between the disks m
\(F_{ij}\) View factor from i to j -
\(F_{ji}\) View factor from j to i -

Method and standards

Analytic view factor.

Where it is used

  • Furnace openings and heaters.
  • Radiation examinations.

Common mistakes

  • Diameters for radii.
  • Swapping i and j.

Assumptions and limits

  • The formula is evaluated as F = 2(r_j/r_i)²/[S + √(S² − 4(r_j/r_i)²)], algebraically the same as the textbook form but free of the cancellation that loses digits when the disks are close together.

  • Diffuse surfaces, coaxial and parallel.

References

  • Incropera
  • DeWitt
  • Bergman and Lavine
  • Fundamentals of Heat and Mass Transfer
  • ch. 13
  • Table 13.2 (coaxial parallel disks)

Questions and answers

Two disks of 2 m diameter, 1 m apart?

F = 0.38: 38 % of what leaves one strikes the other (0.17 for 1 m disks).

What is reciprocity?

A_i F_ij = A_j F_ji.

Why does spacing matter so much?

Radiation spreads; at large distance F falls with the square of distance.

Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.