Worked example
Example: Hot 150→90 °C, cold 30→70 °C. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Hot fluid in | 150.00 °C |
| Hot fluid out | 90.000 °C |
| Cold fluid in | 30.000 °C |
| Cold fluid out | 70.000 °C |
Applying the formula below gives:
| Result | Value |
|---|---|
| Thermal effectiveness of the cold side | 0.33333 |
| Capacity ratio | 1.5000 |
| Correction factor | 0.91048 |
| Counterflow LMTD | 69.521 K |
| Corrected mean temperature difference | 63.298 K |
Open this example in the calculator and change any input.
Formula
\(P = \frac{t_2 - t_1}{T_1 - t_1}, \ R = \frac{T_1 - T_2}{t_2 - t_1}, \quad F = \frac{\sqrt{R^2 + 1}\,\ln\dfrac{1 - P}{1 - RP}}{(R - 1)\ln\dfrac{2 - P(R + 1 - \sqrt{R^2 + 1})}{2 - P(R + 1 + \sqrt{R^2 + 1})}}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(T_{h,in}\) | Hot fluid in | K |
| \(T_{h,out}\) | Hot fluid out | K |
| \(T_{c,in}\) | Cold fluid in | K |
| \(T_{c,out}\) | Cold fluid out | K |
| \(P\) | Thermal effectiveness of the cold side | - |
| \(R\) | Capacity ratio | - |
| \(F\) | Correction factor | - |
| \(\Delta T_{lm,cf}\) | Counterflow LMTD | K |
| \(F\,\Delta T_{lm}\) | Corrected mean temperature difference | K |
Method and standards
Bowman's analytic result for one shell pass and an even number of tube passes.
Where it is used
- Shell and tube exchanger design.
- Heat transfer examinations.
Common mistakes
- Swapping hot and cold sides in P and R.
- Using it for two shell passes.
Assumptions and limits
- Constant U and properties. Within 10⁻⁶ of R = 1 the R = 1 limit form is used, avoiding loss of digits.
References
- R.A. Bowman
- A.C. Mueller and W.M. Nagle
- Trans. ASME 62 (1940) 283; TEMA and Kern
- Process Heat Transfer
Questions and answers
Hot 150→90 °C, cold 30→70 °C?
P = 0.33, R = 1.5, F about 0.91.
What does F < 1 mean?
Part of the flow is co-current, so the mean driving force is less than pure counterflow.
When to add a shell?
When F falls below about 0.75–0.8.
Method and article reviewed by FireCAD engineering on 12 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.