Worked example
Example: 12 kg Na2O/ADt, 1000 ADt/d, half saltcake. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Soda loss per ADt (as Na₂O) | 12.000 kg/t |
| Pulp production (air-dry) | 1,000.0 t/d |
| Share made up as saltcake (rest as NaOH) | 50.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Sodium to replace (as Na₂O) | 12.000 t/d |
| Saltcake (Na₂SO₄) | 13.750 t/d |
| Caustic (NaOH) | 7.7440 t/d |
| Sulphur brought in by the saltcake | 3.1036 t/d |
Open this example in the calculator and change any input.
Formula
\(n = \frac{L_{Na_2O}P}{M_{Na_2O}}, \quad \dot m_{Na_2SO_4} = f_snM_{Na_2SO_4}, \quad \dot m_{NaOH} = 2(1 - f_s)nM_{NaOH}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(L_{Na_2O}\) | Soda loss per ADt (as Na₂O) | kg/kg |
| \(P\) | Pulp production (air-dry) | kg/s |
| \(f_s\) | Share made up as saltcake (rest as NaOH) | - |
| \(\dot m_{Na_2O}\) | Sodium to replace (as Na₂O) | kg/s |
| \(\dot m_{Na_2SO_4}\) | Saltcake (Na₂SO₄) | kg/s |
| \(\dot m_{NaOH}\) | Caustic (NaOH) | kg/s |
| \(\dot m_S\) | Sulphur brought in by the saltcake | kg/s |
Method and standards
Sodium balance.
Where it is used
- Liquor cycle balances.
- Chemical purchasing.
Common mistakes
- Mixing Na₂O and NaOH bases.
- Ignoring sulphur added.
Assumptions and limits
- Make-up equals losses.
- The sulphur shown is what the saltcake brings in. Saltcake is only partly reduced in the recovery boiler, so the sulphur made available as Na₂S is less; the sodium balance is unaffected.
References
- Smook
- Handbook for Pulp & Paper Technologists
- 3rd ed. (Angus Wilde, 2002)
- ch. 10 (chemical make-up of soda losses)
- Stoichiometry: Na₂SO₄ and 2 NaOH per Na₂O; IUPAC masses
Questions and answers
What soda loss is typical?
10–20 kg Na₂O per ADt in modern mills.
Why express as Na₂O?
It is the liquor cycle's common basis for all sodium compounds.
Why not all saltcake?
Too much sulphur raises sulfidity and TRS emissions.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.