FireCADCalc

Green Liquor Reduction Efficiency and Causticizing Efficiency

Reduction efficiency from green liquor Na₂S and Na₂SO₄, and causticizing efficiency from white liquor NaOH, Na₂CO₃ and green liquor NaOH (Smook).

Pulp and paper

Inputs

Examples: Typical liquorsPoor reduction

Results

Reduction efficiency above 90–95 % is normal; low values mean dead load of sulphate in the liquor cycle.

Reduction efficiency80.645%
Causticizing efficiency74.227%
Causticity (green liquor NaOH included)76.190%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Typical liquors. The inputs, in the units selected above:

InputValue
Green liquor Na₂S (as Na₂O)30.000 g/L
Green liquor Na₂SO₄ (as Na₂O)2.5000 g/L
Green liquor NaOH (as Na₂O)10.000 g/L
White liquor NaOH (as Na₂O)85.000 g/L
White liquor Na₂CO₃ (as Na₂O)20.000 g/L

Applying the formula below gives:

ResultValue
Reduction efficiency92.308 %
Causticizing efficiency78.947 %
Causticity (green liquor NaOH included)80.952 %

Open this example in the calculator and change any input.

Formula

\(RE = \frac{Na_2S}{Na_2S + Na_2SO_4}, \quad CE = \frac{NaOH_{WL} - NaOH_{GL}}{(NaOH_{WL} - NaOH_{GL}) + Na_2CO_3}\)

Variables

Symbol Meaning SI unit
\(Na_2S_{GL}\) Green liquor Na₂S (as Na₂O) kg/m³
\(Na_2SO_4\) Green liquor Na₂SO₄ (as Na₂O) kg/m³
\(NaOH_{GL}\) Green liquor NaOH (as Na₂O) kg/m³
\(NaOH_{WL}\) White liquor NaOH (as Na₂O) kg/m³
\(Na_2CO_3\) White liquor Na₂CO₃ (as Na₂O) kg/m³
\(RE\) Reduction efficiency -
\(CE\) Causticizing efficiency -
\(\text{causticity}\) Causticity (green liquor NaOH included) -

Method and standards

Smook's definitions (simplified reduction efficiency).

Where it is used

  • Recovery furnace and causticizing control.

Common mistakes

  • Including green liquor NaOH in CE.
  • Using thiosulphate-free simplification where it matters.

Assumptions and limits

  • All as Na₂O; sulphite and thiosulphate ignored.
  • Green liquor NaOH is subtracted from white liquor NaOH directly, which assumes no dilution between them; weak wash and lime mud water dilute the white liquor, so put both analyses on the same basis (for example per unit of total titratable alkali) first.
  • White liquor NaOH not above the green liquor NaOH is rejected.

References

  • Smook
  • Handbook for Pulp & Paper Technologists
  • 3rd ed. (Angus Wilde, 2002)
  • ch. 7
  • Table 7-1 (definitions 8 and 10)
  • ch. 10 (causticizing)

Questions and answers

Why subtract the green liquor NaOH?

Smook: only NaOH made by the causticizing reaction should count towards its efficiency.

What limits causticizing efficiency?

Equilibrium: about 80–85 % at usual TTA; mills run a few points below it.

What lowers reduction efficiency?

Poor char bed conditions and low bed temperature in the recovery furnace.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.