FireCADCalc

Wood Chip Pile Volume and Days of Storage

Chip pile volume, ground area and days of supply from wood use, chip bulk density (OD kg per loose m³), pile height and the pile's fill factor.

Pulp and paper

Inputs

Examples: 1000 t/d, 20 daysConical pile 7 days

Results

Old chips lose yield and extractives; rotate the pile first-in, first-out.

Chips stored (OD)4,200.0t
Pile volume (loose)28,000m³
Ground area4,242.4m²

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 1000 t/d, 20 days. The inputs, in the units selected above:

InputValue
Wood use (oven-dry)1,000.0 t/d
Chip bulk density (OD per loose m³)160.00 kg/m³
Days of storage20.000 d
Pile height25.000 m
Fill factor of the pile envelope60.000 %

Applying the formula below gives:

ResultValue
Chips stored (OD)20,000 t
Pile volume (loose)125,000 m³
Ground area8,333.3 m²

Open this example in the calculator and change any input.

Formula

\(M = \dot m_w t, \quad V = \frac{M}{\rho_b}, \quad A = \frac{V}{H\phi}\)

Variables

Symbol Meaning SI unit
\(\dot m_w\) Wood use (oven-dry) kg/s
\(\rho_b\) Chip bulk density (OD per loose m³) kg/m³
\(t\) Days of storage s
\(H\) Pile height m
\(\phi\) Fill factor of the pile envelope -
\(M\) Chips stored (OD) kg
\(V\) Pile volume (loose) m³
\(A\) Ground area m²

Method and standards

Inventory and geometry.

Where it is used

  • Woodyard design.

Common mistakes

  • Using solid wood density for chips.
  • Ignoring pile shape.

Assumptions and limits

  • Uniform pile; no compaction.

References

  • Smook
  • Handbook for Pulp & Paper Technologists
  • 3rd ed. (Angus Wilde, 2002)
  • ch. 3 (wood and chip handling and storage)

Questions and answers

What bulk density do chips have?

About 140–200 kg of OD wood per loose cubic metre.

What is the fill factor?

Pile volume divided by height × area; about 1/3 for a cone and 0.5–0.8 for long flat-topped piles.

Why limit storage time?

Chips heat, lose yield and can self-ignite in tall piles.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.