Worked example
Example: 30 000 t loose. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Bagasse to store | 30,000 t |
| Bulk density (loose or baled) | 140.00 kg/m³ |
| Average pile height | 10.000 m |
| Extra area for access and fire lanes | 30.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Pile volume | 214,286 m³ |
| Ground area including access | 27,857 m² |
Open this example in the calculator and change any input.
Formula
\(V = \frac{M}{\rho_b}, \quad A = \frac{V}{H}(1 + k_a)\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(M\) | Bagasse to store | kg |
| \(\rho_b\) | Bulk density (loose or baled) | kg/m³ |
| \(H\) | Average pile height | m |
| \(k_a\) | Extra area for access and fire lanes | - |
| \(V\) | Pile volume | m³ |
| \(A\) | Ground area including access | m² |
Method and standards
Definitions.
Where it is used
- Off-season fuel planning.
- Yard layout.
Common mistakes
- Baled density for loose bagasse.
Assumptions and limits
- Average height; the height is your input (up to 30 m) and is not checked against fire or stability limits.
- Storage losses (heating, fermentation, decay) are not quantified: allow extra bagasse for them.
References
- V = M/ρ
- A = V/H (1 + k); bulk density by measurement
Questions and answers
Loose or baled?
Baling cuts the area several times but costs power and labour.
Does bagasse lose value in storage?
Yes, through fermentation and heating; keep storage time short.
Fire risk?
High: lanes, hydrants and pile height limits matter.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.