Worked example
Example: Hugot example: 250 TCH. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Crushing rate | 250.00 t/h |
| Steam available per tonne cane | 708.00 kg/t |
| Steam to drive turbines per tonne cane | 26.000 kg/t |
| Their steam rate | 5.5000 kg/kWh |
| Pass-out (medium pressure) steam per tonne cane | 40.000 kg/t |
| Steam rate to the pass-out | 11.000 kg/kWh |
| Back-pressure (process) steam per tonne cane | 319.00 kg/t |
| Steam rate to back pressure | 9.0000 kg/kWh |
| Steam rate of the condensing part | 5.0000 kg/kWh |
| Own power use per t cane/h | 37.000 kWh/t |
Applying the formula below gives:
| Result | Value |
|---|---|
| Steam condensed per tonne cane | 323.00 kg/t |
| Power from drive turbines per t cane/h | 4.7273 kWh/t |
| Power from the pass-out steam | 3.6364 kWh/t |
| Power from the back-pressure steam | 35.444 kWh/t |
| Power from the condensing steam | 64.600 kWh/t |
| Total per t cane/h | 108.41 kWh/t |
| Total generated (alternators plus drive turbines) | 27,102 kW |
| Power for sale | 17,852 kW |
Open this example in the calculator and change any input.
Formula
\(S_c = S - S_d - S_m - S_p, \quad p = \frac{S_d}{r_d} + \frac{S_m}{r_m} + \frac{S_p}{r_p} + \frac{S_c}{r_c}, \quad P_x = (p - P_o)A\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(A\) | Crushing rate | kg/s |
| \(S\) | Steam available per tonne cane | kg/kg |
| \(S_d\) | Steam to drive turbines per tonne cane | kg/kg |
| \(r_d\) | Their steam rate | kg/J |
| \(S_m\) | Pass-out (medium pressure) steam per tonne cane | kg/kg |
| \(r_m\) | Steam rate to the pass-out | kg/J |
| \(S_p\) | Back-pressure (process) steam per tonne cane | kg/kg |
| \(r_p\) | Steam rate to back pressure | kg/J |
| \(r_c\) | Steam rate of the condensing part | kg/J |
| \(P_o\) | Own power use per t cane/h | J/kg |
| \(S_c\) | Steam condensed per tonne cane | kg/kg |
| \(p_d\) | Power from drive turbines per t cane/h | J/kg |
| \(p_m\) | Power from the pass-out steam | J/kg |
| \(p_p\) | Power from the back-pressure steam | J/kg |
| \(p_c\) | Power from the condensing steam | J/kg |
| \(p\) | Total per t cane/h | J/kg |
| \(P_g\) | Total generated (alternators plus drive turbines) | W |
| \(P_x\) | Power for sale | W |
Method and standards
Hugot's power balance by steam path.
Where it is used
- Cogeneration studies.
- Power purchase negotiations.
Common mistakes
- Counting drive-turbine power as exportable.
- Steam rates at full load used for part load.
Assumptions and limits
- All steam available is used.
- The total includes the mechanical power of the drive turbines, so the own use must include the mills and pumps they drive; otherwise the power for sale is overstated.
- A negative power for sale means the factory imports; a note says so.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 41
- steam balance for maximum economy and power for sale
- pp. 1016–1022
Questions and answers
Why does process steam give so much power?
Steam expanding to the process pressure yields power on the way at a steam rate near 9 kg/kWh; condensing it yields about 5.
Why does steam economy matter?
Each kilogram of process steam saved can be condensed instead, giving more power for sale.
Typical export?
Hugot reports 70–80 kW per t cane/h possible with high-pressure boilers and an economical factory.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.