Worked example
Example: 1200 m3/h at 0.8 %, 15 % rejects. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Feed flow | 1,200.0 m³/h |
| Feed consistency | 0.80000 % |
| Volumetric reject ratio | 15.000 % |
| Reject consistency | 1.2000 % |
| Stock density | 1,000.0 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Reject flow | 180.00 m³/h |
| Accept consistency | 0.72941 % |
| Mass reject ratio | 22.500 % |
| Fibre to rejects (OD) | 51.840 t/d |
Open this example in the calculator and change any input.
Formula
\(\dot V_R = R_V\dot V_F, \quad C_A = \frac{\dot V_F C_F - \dot V_R C_R}{\dot V_F - \dot V_R}, \quad R_M = \frac{\dot V_R C_R}{\dot V_F C_F}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot V_F\) | Feed flow | m³/s |
| \(C_F\) | Feed consistency | - |
| \(R_V\) | Volumetric reject ratio | - |
| \(C_R\) | Reject consistency | - |
| \(\rho\) | Stock density | kg/m³ |
| \(\dot V_R\) | Reject flow | m³/s |
| \(C_A\) | Accept consistency | - |
| \(R_M\) | Mass reject ratio | - |
| \(\dot m_{R,OD}\) | Fibre to rejects (OD) | kg/s |
Method and standards
Volume and fibre balances.
Where it is used
- Cleaner plant design and audits.
Common mistakes
- Mixing mass and volume reject ratios.
Assumptions and limits
- Stock density constant across streams.
References
- Smook
- Handbook for Pulp & Paper Technologists
- 3rd ed. (Angus Wilde, 2002)
- ch. 9.5 (centrifugal cleaning)
Questions and answers
What reject ratio is typical?
10–20 % by volume on the first stage.
Why does reject consistency matter?
Thick rejects plug the cleaner tips; Smook suggests checking for this when efficiency drops.
How is fibre loss kept low?
By cascading stages and sending only the last stage's rejects to waste.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.