FireCADCalc

Causticizing: Lime Requirement and Lime Mud

Burnt lime to causticize green liquor Na₂CO₃ (as Na₂O) to a target efficiency, with lime availability and excess, and the CaCO₃ lime mud formed.

Pulp and paper

Inputs

Examples: 100 m3/h green liquor, 90 g/L Na2CO3Fresh lime

Results

Over-liming makes lime mud hard to filter and wastes kiln fuel; keep excess low and slaker temperature steady.

Pure CaO reacted109.44t/d
Burnt lime fed117.51t/d
CaCO₃ formed (part of the lime mud)195.33t/d
NaOH formed (as Na₂O)120.96t/d
Lime mud solids (CaCO₃ + excess CaO + lime inerts)203.39t/d

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 100 m3/h green liquor, 90 g/L Na2CO3. The inputs, in the units selected above:

InputValue
Green liquor flow100.00 m³/h
Green liquor Na₂CO₃ (as Na₂O)90.000 g/L
Causticizing efficiency to reach82.000 %
Lime availability (CaO content)88.000 %
Lime excess over stoichiometric3.0000 %

Applying the formula below gives:

ResultValue
Pure CaO reacted160.25 t/d
Burnt lime fed187.57 t/d
CaCO₃ formed (part of the lime mud)286.02 t/d
NaOH formed (as Na₂O)177.12 t/d
Lime mud solids (CaCO₃ + excess CaO + lime inerts)313.34 t/d

Open this example in the calculator and change any input.

Formula

\(\dot n = \frac{\dot V_{GL}\,c\,CE}{M_{Na_2O}}, \quad \dot m_{CaO} = \dot n M_{CaO}, \quad \dot m_L = \frac{\dot m_{CaO}(1 + x)}{a}, \quad \dot m_{CaCO_3} = \dot n M_{CaCO_3}, \quad \dot m_{mud} = \dot m_{CaCO_3} + x\,\dot m_{CaO} + (1 - a)\,\dot m_L\)

Variables

Symbol Meaning SI unit
\(\dot V_{GL}\) Green liquor flow m³/s
\(Na_2CO_3\) Green liquor Na₂CO₃ (as Na₂O) kg/m³
\(CE\) Causticizing efficiency to reach -
\(a\) Lime availability (CaO content) -
\(x\) Lime excess over stoichiometric -
\(\dot m_{CaO}\) Pure CaO reacted kg/s
\(\dot m_L\) Burnt lime fed kg/s
\(\dot m_{CaCO_3}\) CaCO₃ formed (part of the lime mud) kg/s
\(\dot m_{mud}\) Lime mud solids (CaCO₃ + excess CaO + lime inerts) kg/s
\(\dot m_{NaOH}\) NaOH formed (as Na₂O) kg/s

Method and standards

Causticizing stoichiometry.

Where it is used

  • Slaker and kiln capacity planning.

Common mistakes

  • Using Na₂CO₃ as Na₂CO₃ with a Na₂O-basis analysis.
  • Ignoring lime availability.

Assumptions and limits

  • Green liquor NaOH ignored; complete slaking. In kraft practice the causticizing efficiency is NaOH/(NaOH + Na₂CO₃) including the NaOH already in the green liquor; here it applies to the Na₂CO₃ only, which overstates the lime when the green liquor carries NaOH.
  • The lime mud solids add the excess CaO and the lime's inerts to the CaCO₃ formed.

References

  • Smook
  • Handbook for Pulp & Paper Technologists
  • 3rd ed. (Angus Wilde, 2002)
  • ch. 10 (causticizing: CaO + H₂O → Ca(OH)₂; Ca(OH)₂ + Na₂CO₃ → 2 NaOH + CaCO₃)
  • Molar masses from IUPAC atomic masses

Questions and answers

Why work in Na₂O units?

One mole of Na₂CO₃ (as Na₂O) needs one mole of CaO; the Na₂O basis makes the stoichiometry direct.

What lime availability is typical?

Reburned lime is 85–92 % available CaO; fresh lime is higher.

Why not 100 % efficiency?

The reaction is an equilibrium; about 80–85 % is reached at usual liquor strengths.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.