Worked example
Example: 100 m3/h green liquor, 90 g/L Na2CO3. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Green liquor flow | 100.00 m³/h |
| Green liquor Na₂CO₃ (as Na₂O) | 90.000 g/L |
| Causticizing efficiency to reach | 82.000 % |
| Lime availability (CaO content) | 88.000 % |
| Lime excess over stoichiometric | 3.0000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Pure CaO reacted | 160.25 t/d |
| Burnt lime fed | 187.57 t/d |
| CaCO₃ formed (part of the lime mud) | 286.02 t/d |
| NaOH formed (as Na₂O) | 177.12 t/d |
| Lime mud solids (CaCO₃ + excess CaO + lime inerts) | 313.34 t/d |
Open this example in the calculator and change any input.
Formula
\(\dot n = \frac{\dot V_{GL}\,c\,CE}{M_{Na_2O}}, \quad \dot m_{CaO} = \dot n M_{CaO}, \quad \dot m_L = \frac{\dot m_{CaO}(1 + x)}{a}, \quad \dot m_{CaCO_3} = \dot n M_{CaCO_3}, \quad \dot m_{mud} = \dot m_{CaCO_3} + x\,\dot m_{CaO} + (1 - a)\,\dot m_L\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot V_{GL}\) | Green liquor flow | m³/s |
| \(Na_2CO_3\) | Green liquor Na₂CO₃ (as Na₂O) | kg/m³ |
| \(CE\) | Causticizing efficiency to reach | - |
| \(a\) | Lime availability (CaO content) | - |
| \(x\) | Lime excess over stoichiometric | - |
| \(\dot m_{CaO}\) | Pure CaO reacted | kg/s |
| \(\dot m_L\) | Burnt lime fed | kg/s |
| \(\dot m_{CaCO_3}\) | CaCO₃ formed (part of the lime mud) | kg/s |
| \(\dot m_{mud}\) | Lime mud solids (CaCO₃ + excess CaO + lime inerts) | kg/s |
| \(\dot m_{NaOH}\) | NaOH formed (as Na₂O) | kg/s |
Method and standards
Causticizing stoichiometry.
Where it is used
- Slaker and kiln capacity planning.
Common mistakes
- Using Na₂CO₃ as Na₂CO₃ with a Na₂O-basis analysis.
- Ignoring lime availability.
Assumptions and limits
- Green liquor NaOH ignored; complete slaking. In kraft practice the causticizing efficiency is NaOH/(NaOH + Na₂CO₃) including the NaOH already in the green liquor; here it applies to the Na₂CO₃ only, which overstates the lime when the green liquor carries NaOH.
- The lime mud solids add the excess CaO and the lime's inerts to the CaCO₃ formed.
References
- Smook
- Handbook for Pulp & Paper Technologists
- 3rd ed. (Angus Wilde, 2002)
- ch. 10 (causticizing: CaO + H₂O → Ca(OH)₂; Ca(OH)₂ + Na₂CO₃ → 2 NaOH + CaCO₃)
- Molar masses from IUPAC atomic masses
Questions and answers
Why work in Na₂O units?
One mole of Na₂CO₃ (as Na₂O) needs one mole of CaO; the Na₂O basis makes the stoichiometry direct.
What lime availability is typical?
Reburned lime is 85–92 % available CaO; fresh lime is higher.
Why not 100 % efficiency?
The reaction is an equilibrium; about 80–85 % is reached at usual liquor strengths.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.