Worked example
Example: e 91.85, fibre 14.5. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Actual mill extraction | 91.850 % |
| Fibre % cane | 14.500 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Deerr's loss term: pol not extracted per unit fibre, (1 − e)(1 − f)/f | 0.48057 |
| Reduced extraction, Noël Deerr | 93.135 % |
| Reduced extraction, Mittal | 92.974 % |
Open this example in the calculator and change any input.
Formula
\(V = \frac{(1-e)(1-f)}{f}, \quad RME_{ND} = \frac{7 - V}{7}, \quad RME_M = 1 - \frac{0.125\,(1-e)}{f}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(e\) | Actual mill extraction | - |
| \(f\) | Fibre % cane | - |
| \(V\) | Deerr's loss term: pol not extracted per unit fibre, (1 − e)(1 − f)/f | - |
| \(RME_{ND}\) | Reduced extraction, Noël Deerr | - |
| \(RME_{M}\) | Reduced extraction, Mittal | - |
Method and standards
Noël Deerr; Mittal.
Where it is used
- Milling tandem performance.
- Season and inter-factory comparison.
Common mistakes
- Percentages entered as fractions in the formula.
- Fibre % bagasse used for fibre % cane.
Assumptions and limits
- Pol extraction basis; e and f are fractions in the formulas.
References
- Noël Deerr reduced extraction to 12.5 % fibre: RME = 100 (7 − V)/7
- V = (1 − e)(1 − f)/f
- Mittal: RME = 100 [1 − 0.125 (1 − e)/f] with e and f as fractions (12.5 (1 − e)/f with f in per cent)
- Sugar factory chemical control (daily manufacturing report) definitions
- as compiled in SugarProcessTech
- Formulas for calculating sugar industry DMR
Questions and answers
Why reduce to 12.5 % fibre?
Higher fibre traps more juice; reducing removes that effect so mills can be compared.
Deerr or Mittal?
Both are in use; report which one, and keep to it for trends.
What is 7 in Deerr's formula?
At 12.5 % fibre there are 7 parts of non-fibre per part of fibre: 87.5/12.5.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.