Worked example
Example: Typical tandem. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Pol extraction | 95.500 % |
| Fibre % cane | 14.500 % |
| Pol % bagasse | 1.8000 % |
| Purity of the last expressed juice | 72.000 % |
| Brix of primary juice | 20.000 % |
| Fibre % bagasse | 49.000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Extraction ratio 100(100 − e)/f | 31.034 |
| Brix of bagasse | 2.5000 % |
| Lost undiluted juice % fibre | 25.510 % |
Open this example in the calculator and change any input.
Formula
\(ER = \frac{100(100 - e)}{f}, \quad Bx_B = \frac{Pol_B}{P_l}, \quad LJ = \frac{Bx_B}{B_1\,f'}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(e\) | Pol extraction | - |
| \(f\) | Fibre % cane | - |
| \(Pol_B\) | Pol % bagasse | - |
| \(P_l\) | Purity of the last expressed juice | - |
| \(B_1\) | Brix of primary juice | - |
| \(f'\) | Fibre % bagasse | - |
| \(ER\) | Extraction ratio 100(100 − e)/f | - |
| \(Bx_B\) | Brix of bagasse | - |
| \(LJ\) | Lost undiluted juice % fibre | - |
Method and standards
Hugot's definitions (percent forms written with fractions).
Where it is used
- Comparing milling performance.
- Weekly mill reports.
Common mistakes
- Using fibre % bagasse in the extraction ratio.
- Using mixed juice brix for primary juice brix.
Assumptions and limits
- Routine analyses; apparent purities.
- ER is Hugot's plain number 100(100 − e)/f with e and f in per cent; LJ is shown in per cent. Both come out near 34 for modern tandems, which is why they can be compared directly.
- Purity above 100 % is rejected.
References
- Hugot
- Handbook of Cane Sugar Engineering
- 3rd ed. (Elsevier, 1986)
- ch. 20
- eqns 20.11–20.14
- pp. 319–320
Questions and answers
Which is better, extraction ratio or lost juice?
Hugot prefers the extraction ratio: it measures sugar, the thing sold, and is simple.
Why is brix of bagasse uncertain?
It uses the purity of the last expressed juice, which is higher than the purity of the juice left in the bagasse.
Typical values?
Both lie between about 30 and 38 for modern tandems.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.