Worked example
Example: 250 TCH, 30 % on cane. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Crushing rate | 250.00 t/h |
| Added (imbibition) water % cane | 30.000 % |
| Fibre % cane | 14.500 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Imbibition water flow | 75.000 t/h |
| Imbibition % fibre | 206.90 % |
| Fibre crushed | 36.250 t/h |
Open this example in the calculator and change any input.
Formula
\(\dot m_w = C\,AW, \quad \dot m_F = C\,F_c, \quad AW/F = \frac{AW}{F_c}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(C\) | Crushing rate | kg/s |
| \(AW\) | Added (imbibition) water % cane | - |
| \(F_c\) | Fibre % cane | - |
| \(\dot m_w\) | Imbibition water flow | kg/s |
| \(AW/F\) | Imbibition % fibre | - |
| \(\dot m_F\) | Fibre crushed | kg/s |
Method and standards
Definitions.
Where it is used
- Mill control.
- Steam balance studies.
Common mistakes
- Mixing % cane and % fibre bases.
Assumptions and limits
- Steady crush.
References
- Sugar factory chemical control (daily manufacturing report) definitions
- as compiled in SugarProcessTech
- Formulas for calculating sugar industry DMR
Questions and answers
Why express imbibition on fibre?
Fibre holds the juice; water per fibre compares mills with different cane.
More imbibition is always better?
Extraction rises, but so does evaporation and steam; there is an economic optimum.
Hot or cold imbibition?
Hot water extracts better but can soften bagasse feeding; mills choose by trial.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.