FireCADCalc

Extraction with Simple and Compound Imbibition (Hugot)

Total extraction of a tandem with simple and with compound imbibition from fibre, dry-crushing bagasse fibre, wet mills, imbibition and efficiency β (Hugot ch. 19).

Sugar mill and cogeneration

Inputs

Examples: Four wet mills, w 0.30Three wet mills, heavy imbibition

Hugot assumes about 0.5 for the wet-crushing theory.
Hugot: 1.05–1.10.
Hugot: water under pressure 0.60–0.80, returned juice 0.50–0.70; 0.60–0.65 in practice.

Results

The theory assumes every wet mill leaves bagasse at the fibre m; take the results as trends, not guarantees.

Imbibition per unit fibre w/f3.0000
Extraction by dry crushing86.483%
Total extraction, simple imbibition96.043%
Total extraction, compound imbibition96.905%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Four wet mills, w 0.30. The inputs, in the units selected above:

InputValue
Fibre per unit cane15.000 %
Fibre in bagasse after dry crushing50.000 %
Sugar/juice extraction ratio in dry crushing1.0700 -
Number of wet-crushing mills4.0000 -
Imbibition water per unit cane30.000 %
Imbibition efficiency65.000 %

Applying the formula below gives:

ResultValue
Imbibition per unit fibre w/f2.0000
Extraction by dry crushing88.118 %
Total extraction, simple imbibition95.526 %
Total extraction, compound imbibition96.214 %

Open this example in the calculator and change any input.

Formula

\(\lambda = \frac{w}{f}, \quad e_d = \min\left[1, \frac{\alpha(m - f)}{m(1 - f)}\right], \quad r_s = \frac{\lambda m}{n(1 - m) + \lambda m}, \quad E_s = e_d + (1 - e_d)[1 - (1 - \beta r_s)^n]\)

\(r = \frac{\lambda m}{1 - m + \lambda m}, \quad \lambda' = \frac{\beta r}{1 - \beta r}, \quad E_c = e_d + (1 - e_d)\,\lambda'\frac{\lambda'^n - 1}{\lambda'^{n+1} - 1}\ \left(\lambda' \ne 1\right), \quad E_c = e_d + (1 - e_d)\frac{n}{n + 1}\ \left(\lambda' = 1\right)\)

Variables

Symbol Meaning SI unit
\(f\) Fibre per unit cane -
\(m\) Fibre in bagasse after dry crushing -
\(\alpha\) Sugar/juice extraction ratio in dry crushing -
\(n\) Number of wet-crushing mills -
\(w\) Imbibition water per unit cane -
\(\beta\) Imbibition efficiency -
\(\lambda\) Imbibition per unit fibre w/f -
\(e_d\) Extraction by dry crushing -
\(E_s\) Total extraction, simple imbibition -
\(E_c\) Total extraction, compound imbibition -

Method and standards

Hugot's mathematical study of imbibition, Handbook of Cane Sugar Engineering, 3rd ed., ch. 19, eqns 19.5–19.16, pp. 284–293. The simple-imbibition forms are Hugot's own general-m forms (19.5, 19.7, 19.9); the same m for the dry-crushing and wet mills is Hugot's hypothesis (p. 285). Hugot derives compound imbibition for m = 0.5 (p. 293); the calculator generalises it by taking λ as r/(1 − r), the ratio Hugot uses on p. 294.

Where it is used

  • Comparing imbibition schemes.
  • Estimating the gain from more imbibition.

Common mistakes

  • Entering imbibition % fibre as w.
  • Taking β = 1.

Assumptions and limits

  • Constant bagasse fibre after each wet mill.

References

  • Hugot
  • Handbook of Cane Sugar Engineering
  • 3rd ed. (Elsevier, 1986)
  • ch. 19
  • eqns 19.3–19.16
  • pp. 281–293

Questions and answers

Why does λ matter more than w?

Extraction by wet crushing depends on imbibition per unit fibre; doubling fibre and water together changes nothing.

Is compound always better?

In theory by far; with a realistic efficiency β the gap shrinks a lot, which is Hugot's main point.

What is β?

The share of the theoretical sugar that each imbibition actually recovers, because water does not mix with all the juice in the bagasse.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.