FireCADCalc

Bagasse Brix, Fibre % Bagasse and Fibre % Cane

Brix % bagasse from its pol and the last expressed juice purity, fibre % bagasse by difference and fibre % cane from bagasse % cane.

Sugar mill and cogeneration

Inputs

Examples: Typical bagasseWet bagasse

Results

The juice left in bagasse is taken at the purity of the last expressed juice.

Brix % bagasse2.4000%
Fibre % bagasse47.600%
Fibre % cane13.804%

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Typical bagasse. The inputs, in the units selected above:

InputValue
Moisture % bagasse50.000 %
Pol % bagasse1.8000 %
Purity of last expressed juice75.000 %
Bagasse % cane29.000 %

Applying the formula below gives:

ResultValue
Brix % bagasse2.4000 %
Fibre % bagasse47.600 %
Fibre % cane13.804 %

Open this example in the calculator and change any input.

Formula

\(Bx_B = \frac{Pol_B}{P_{LEJ}}, \quad F_B = 1 - W - Bx_B, \quad F_c = F_B\,B\)

Variables

Symbol Meaning SI unit
\(W\) Moisture % bagasse -
\(Pol_B\) Pol % bagasse -
\(P_{LEJ}\) Purity of last expressed juice -
\(B\) Bagasse % cane -
\(Bx_B\) Brix % bagasse -
\(F_B\) Fibre % bagasse -
\(F_c\) Fibre % cane -

Method and standards

Bagasse = fibre + moisture + brix.

Where it is used

  • Daily mill control.
  • Bagasse quality for the boiler house.

Common mistakes

  • Moisture from a wet sample left open.
  • Using mixed juice purity.

Assumptions and limits

  • Routine analyses.

References

  • Sugar factory chemical control (daily manufacturing report) definitions
  • as compiled in SugarProcessTech
  • Formulas for calculating sugar industry DMR

Questions and answers

Why the last expressed juice purity?

The juice remaining in bagasse resembles the juice from the last mill.

Is fibre % cane measured?

It can be, but the bagasse balance gives it every day.

Does fibre affect extraction?

Yes: more fibre holds more juice, which is why reduced extraction exists.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.