FireCADCalc

Pulp Yield and Wood Consumption per Air-Dry Tonne

Pulp yield on wood, screened yield after rejects, and wood consumption per air-dry tonne of pulp (90 % bone dry) in OD tonnes and solid cubic metres.

Pulp and paper

Inputs

Examples: Kraft 47 %, 2 % rejectsEucalyptus 52 %

Results

Wood for screened chips only: bark, fines and chip-screening losses come on top.

Screened yield51.480%
OD wood per air-dry tonne of pulp1.7483kg/kg
Solid wood per air-dry tonne3.4965m³/t

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: Kraft 47 %, 2 % rejects. The inputs, in the units selected above:

InputValue
Total pulp yield on OD wood47.000 %
Rejects (share of total pulp)2.0000 %
Basic density of the wood (OD mass per green volume)450.00 kg/m³

Applying the formula below gives:

ResultValue
Screened yield46.060 %
OD wood per air-dry tonne of pulp1.9540 kg/kg
Solid wood per air-dry tonne4.3422 m³/t

Open this example in the calculator and change any input.

Formula

\(Y_s = Y(1 - r), \quad W_{OD} = \frac{0.9}{Y_s}, \quad V_w = \frac{W_{OD}}{\rho_b}\)

Variables

Symbol Meaning SI unit
\(Y\) Total pulp yield on OD wood -
\(r\) Rejects (share of total pulp) -
\(\rho_b\) Basic density of the wood (OD mass per green volume) kg/m³
\(Y_s\) Screened yield -
\(W_{OD}\) OD wood per air-dry tonne of pulp kg/kg
\(V_w\) Solid wood per air-dry tonne m³/kg

Method and standards

Yield definitions.

Where it is used

  • Wood procurement.
  • Mill yield monitoring.

Common mistakes

  • Mixing OD and AD tonnes.
  • Using air-dry density for green volume.

Assumptions and limits

  • Rejects not re-cooked.
  • Wood consumption is for screened chips to the digester; bark, fines and chip-screening losses are not included.

References

  • Smook
  • Handbook for Pulp & Paper Technologists
  • 3rd ed. (Angus Wilde, 2002)
  • ch. 4 and 8: yield on wood; air-dry ton = 90 % bone-dry fibre and 10 % water (ch. 8)

Questions and answers

What yields are typical?

Kraft 45–50 %, sulphite 45–55 %, mechanical pulps 90–97 %.

What is an air-dry tonne?

0.9 t of bone-dry fibre plus 0.1 t of water.

Why basic density?

Wood is bought by volume; basic density converts solid cubic metres to OD tonnes.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.