FireCADCalc

Recycled Fibre Deinking: Yield and Rejects

Deinking plant yield, rejects and sludge from recovered paper input, its moisture and ash, and the ash removed in flotation and washing.

Pulp and paper

Inputs

Examples: 600 t/d ONP/OMGOffice paper to tissue

Results

Most of the yield loss is filler ash removed to brighten the pulp; ash leaving in the pulp counts as product.

Dry recovered paper276.00t/d
Deinked pulp (dry)190.10t/d
Yield on dry recovered paper68.878%
Rejects and sludge (dry)85.898t/d

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 600 t/d ONP/OMG. The inputs, in the units selected above:

InputValue
Recovered paper (as received)600.00 t/d
Moisture in recovered paper10.000 %
Ash in the recovered paper (dry)18.000 %
Ash in the deinked pulp (dry)4.0000 %
Fibre (ash-free) lost to rejects8.0000 %

Applying the formula below gives:

ResultValue
Dry recovered paper540.00 t/d
Deinked pulp (dry)424.35 t/d
Yield on dry recovered paper78.583 %
Rejects and sludge (dry)115.65 t/d

Open this example in the calculator and change any input.

Formula

\(\dot m_{OD} = \dot m_{RP}(1 - w), \quad \dot m_p = \frac{\dot m_{OD}(1 - a_{in})(1 - L_f)}{1 - a_{out}}\)

Variables

Symbol Meaning SI unit
\(\dot m_{RP}\) Recovered paper (as received) kg/s
\(w\) Moisture in recovered paper -
\(a_{in}\) Ash in the recovered paper (dry) -
\(a_{out}\) Ash in the deinked pulp (dry) -
\(L_f\) Fibre (ash-free) lost to rejects -
\(\dot m_{OD}\) Dry recovered paper kg/s
\(\dot m_p\) Deinked pulp (dry) kg/s
\(Y\) Yield on dry recovered paper -
\(\dot m_s\) Rejects and sludge (dry) kg/s

Method and standards

Ash-free fibre balance.

Where it is used

  • Recovered paper purchasing.
  • Sludge handling sizing.

Common mistakes

  • Mixing wet and dry tonnes.
  • Ignoring ash in the product.

Assumptions and limits

  • Ash and fibre balances only.
  • Ash leaving in the pulp cannot exceed the ash fed; inputs that would need more are rejected.

References

  • Smook
  • Handbook for Pulp & Paper Technologists
  • 3rd ed. (Angus Wilde, 2002)
  • ch. 14 (recycled fibre: deinking yield and losses)

Questions and answers

What yields are typical?

Newsprint deinking 75–85 %; tissue and fine paper deinking, with more ash removed, 60–70 %.

Why does ash lower yield?

Filler is washed and floated out with the ink to raise brightness.

Is the yield on dry basis?

Yes, dry deinked pulp per dry recovered paper.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.