FireCADCalc

Chlorine Dioxide as Active Chlorine and Kappa Factor

Converts a ClO₂ charge to active chlorine (2.63 × by electron transfer) and computes the kappa factor of a D₀ stage from the entering kappa number.

Pulp and paper

Inputs

Examples: 0.9 % ClO2 on kappa 14ClO2 + Cl2 substitution

Results

ClO₂ takes 5 electrons per molecule against 2 for Cl₂: one kg of ClO₂ oxidises like 2.63 kg of chlorine.

Active chlorine per kg ClO₂2.6280
Active chlorine charge2.5768%
Kappa factor0.085892
ClO₂ used100.00kg/h

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 0.9 % ClO2 on kappa 14. The inputs, in the units selected above:

InputValue
ClO₂ charge on OD pulp0.90000 %
Elemental chlorine charge on OD pulp0 %
Kappa number entering the stage14.000 -
Pulp production (oven-dry)500.00 t/d

Applying the formula below gives:

ResultValue
Active chlorine per kg ClO₂2.6280
Active chlorine charge2.3652 %
Kappa factor0.16894
ClO₂ used187.50 kg/h

Open this example in the calculator and change any input.

Formula

\(f = \frac{5M_{Cl}}{M_{ClO_2}} \approx 2.63, \quad c_{aCl} = f\,c_{ClO_2} + c_{Cl_2}, \quad KF = \frac{c_{aCl}(\%)}{\kappa}\)

Variables

Symbol Meaning SI unit
\(c_{ClO_2}\) ClO₂ charge on OD pulp -
\(c_{Cl_2}\) Elemental chlorine charge on OD pulp -
\(\kappa\) Kappa number entering the stage -
\(\dot m_{OD}\) Pulp production (oven-dry) kg/s
\(f\) Active chlorine per kg ClO₂ -
\(c_{aCl}\) Active chlorine charge -
\(KF\) Kappa factor -
\(\dot m_{ClO_2}\) ClO₂ used kg/s

Method and standards

Electron-transfer equivalence and kappa factor definition.

Where it is used

  • Bleach plant charge setting.

Common mistakes

  • Confusing ClO₂ and active chlorine charges.
  • Using kappa after the stage.

Assumptions and limits

  • Charges on OD pulp.

References

  • Smook
  • Handbook for Pulp & Paper Technologists
  • 3rd ed. (Angus Wilde, 2002)
  • ch. 11 (bleaching with chlorine dioxide)
  • Active chlorine equivalence from electron transfer: ClO₂ (5 e⁻) against Cl₂ (2 e⁻)

Questions and answers

Why convert to active chlorine?

It puts ClO₂ and chlorine on one oxidising basis for comparing stages.

What kappa factor is typical?

0.18–0.25 for a D₀ stage.

Where does 2.63 come from?

5 × 35.45/67.45: five electrons per ClO₂, two per Cl₂.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.