FireCADCalc

Paper Grammage, Caliper, Density and Bulk

Apparent density and bulk of paper or board from grammage and caliper, with North American basis weights per 3000 ft² and per ream (25 × 38, 17 × 22 in).

Pulp and paper

Inputs

Examples: 80 g/m2, 100 µm copy paperBoard 300 g/m2, 450 µm

Results

Apparent density800.00kg/m³
Bulk1.2500L/kg
Basis weight, lb per 3000 ft²49.156
Basis weight, lb per ream 25 × 38 in54.049
Basis weight, lb per ream 17 × 22 in21.278

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 80 g/m2, 100 µm copy paper. The inputs, in the units selected above:

InputValue
Grammage (basis weight)80.000 g/m²
Caliper (thickness)0.10000 mm

Applying the formula below gives:

ResultValue
Apparent density800.00 kg/m³
Bulk1.2500 L/kg
Basis weight, lb per 3000 ft²49.156
Basis weight, lb per ream 25 × 38 in54.049
Basis weight, lb per ream 17 × 22 in21.278

Open this example in the calculator and change any input.

Formula

\(\rho_a = \frac{G}{t}, \quad B = \frac{t}{G}, \quad BW = G \times A_{ream}\)

Variables

Symbol Meaning SI unit
\(G\) Grammage (basis weight) kg/m²
\(t\) Caliper (thickness) m
\(\rho_a\) Apparent density kg/m³
\(B\) Bulk m³/kg
\(BW_{3000}\) Basis weight, lb per 3000 ft² -
\(BW_{25\times38}\) Basis weight, lb per ream 25 × 38 in -
\(BW_{17\times22}\) Basis weight, lb per ream 17 × 22 in -

Method and standards

Definitions; ream areas from the sheet sizes.

Where it is used

  • Grade specifications.
  • Converting US and metric grades.

Common mistakes

  • Mixing grammage and ream weight.
  • Measuring caliper with the wrong pressure.

Assumptions and limits

  • Conditioned paper.

References

  • Smook
  • Handbook for Pulp & Paper Technologists
  • 3rd ed. (Angus Wilde, 2002)
  • ch. 22 (paper properties: basis weight, caliper, density and bulk)

Questions and answers

What is bulk?

The reciprocal of density, in cm³/g; tissue and board are high-bulk grades.

Why several ream sizes?

US grades use different basic sheets: 25 × 38 in for book and offset, 17 × 22 in for bond, 3000 ft² for newsprint and board.

What is 80 g/m² in pounds?

About 54 lb (25 × 38), 21 lb (17 × 22) or 49 lb per 3000 ft².

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.