FireCADCalc

Air-Dry, Oven-Dry and Wet Pulp Tonnes

Converts between oven-dry (bone-dry) tonnes, air-dry tonnes (90 % dry) and wet tonnes at any dryness, for pulp shipments and production reports.

Pulp and paper

Inputs

Examples: 1000 t at 50 % dryBale at 92 %

Results

Oven-dry mass230.00t
Air-dry mass (90 % dry)255.56t
Water in the wet mass20.000t

Download PDF CSV Link to this result Compare another case

Log in to save calculations to your dashboard.

Worked example

Example: 1000 t at 50 % dry. The inputs, in the units selected above:

InputValue
Wet mass weighed1,000.0 t
Dryness (dry solids share)50.000 %

Applying the formula below gives:

ResultValue
Oven-dry mass500.00 t
Air-dry mass (90 % dry)555.56 t
Water in the wet mass500.00 t

Open this example in the calculator and change any input.

Formula

\(M_{OD} = M d, \quad M_{AD} = \frac{M_{OD}}{0.9}\)

Variables

Symbol Meaning SI unit
\(M\) Wet mass weighed kg
\(d\) Dryness (dry solids share) -
\(M_{OD}\) Oven-dry mass kg
\(M_{AD}\) Air-dry mass (90 % dry) kg
\(M_w\) Water in the wet mass kg

Method and standards

Trade definitions.

Where it is used

  • Pulp sales and shipping.
  • Production reporting.

Common mistakes

  • Confusing dryness with moisture.
  • Using metric and short tons together.

Assumptions and limits

  • 90 % air-dry convention.

References

  • Smook
  • Handbook for Pulp & Paper Technologists
  • 3rd ed. (Angus Wilde, 2002)
  • ch. 8: an air-dry ton is 90 % bone-dry fibre and 10 % water

Questions and answers

Why 90 %?

It is the trade convention for market pulp; Smook notes pulp is commonly made at 90–95 % dry.

Is oven-dry the same as bone-dry?

Yes.

How is dryness measured?

By drying a sample at 105 °C to constant weight.

Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.

Related calculators

Free engineering calculators: every page computes in SI and converts to your units. Results are for engineering estimation; verify critical designs against the referenced standards.

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.