Worked example
Example: 100 KLPD. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Steam used | 280.00 t/d |
| Power used | 1,041.7 kW |
| Fuel burnt | 60.000 t/d |
| Alcohol produced (absolute) | 100.00 kL/d |
Applying the formula below gives:
| Result | Value |
|---|---|
| Steam per litre | 2.8000 kg/L |
| Power per kL | 250.00 kWh/m³ |
| Fuel per kL | 0.60000 kg/L |
Open this example in the calculator and change any input.
Formula
\(s = \frac{\dot m_s}{\dot V_e}, \quad e = \frac{\dot E}{\dot V_e}, \quad f = \frac{\dot m_f}{\dot V_e}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m_s\) | Steam used | kg/s |
| \(\dot E\) | Power used | W |
| \(\dot m_f\) | Fuel burnt | kg/s |
| \(\dot V_e\) | Alcohol produced (absolute) | m³/s |
| \(s\) | Steam per litre | kg/m³ |
| \(e\) | Power per kL | J/m³ |
| \(f\) | Fuel per kL | kg/m³ |
Method and standards
Definitions.
Where it is used
- Monthly energy reports.
- Benchmarking.
Common mistakes
- Bulk litres used.
Assumptions and limits
- Same period for all.
- Fuel is by mass with no calorific value or moisture basis, and steam by mass with no pressure or enthalpy basis; the KPIs compare only plants with the same fuel and steam conditions.
References
- Definitions (specific consumption = daily use ÷ daily production)
Questions and answers
kWh/m³ is kWh per kL?
Yes: a kilolitre is a cubic metre.
Why track all three?
Steam, power and fuel move together; a change in one shows where to look.
Whole plant or distillation only?
State the boundary; ZLD evaporation adds a lot of steam.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.