Worked example
Example: 40 t/h whole stillage. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Whole stillage | 40.000 t/h |
| Solids in whole stillage | 13.000 % |
| Solids in wet cake | 33.000 % |
| Solids in thin stillage | 7.0000 % |
Applying the formula below gives:
| Result | Value |
|---|---|
| Wet cake | 9.2308 t/h |
| Thin stillage | 30.769 t/h |
| Solids captured in cake | 58.580 % |
Open this example in the calculator and change any input.
Formula
\(\dot m_c = \dot m_f \frac{x_f - x_t}{x_c - x_t}, \quad \dot m_t = \dot m_f - \dot m_c, \quad \eta_s = \frac{\dot m_c x_c}{\dot m_f x_f}\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(\dot m_f\) | Whole stillage | kg/s |
| \(x_f\) | Solids in whole stillage | - |
| \(x_c\) | Solids in wet cake | - |
| \(x_t\) | Solids in thin stillage | - |
| \(\dot m_c\) | Wet cake | kg/s |
| \(\dot m_t\) | Thin stillage | kg/s |
| \(\eta_s\) | Solids captured in cake | - |
Method and standards
Solids balance.
Where it is used
- Decanter sizing and checks.
Common mistakes
- Suspended and dissolved solids mixed between streams.
Assumptions and limits
- Steady state.
References
- Two-product solids balance
Questions and answers
Why a decanter?
It removes suspended solids so the thin stillage can be evaporated and recycled.
Solids capture?
The share of feed solids leaving in the cake.
Polymer?
Flocculant raises capture but adds cost.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.