Worked example
Example: 1000 t glucose. The inputs, in the units selected above:
| Input | Value |
|---|---|
| Sugar fermented | 1,000.0 t |
| Sugar | Glucose / invert (hexose) |
| Fermentation efficiency | 100.00 % |
| Ethanol density at 20 °C | 789.24 kg/m³ |
Applying the formula below gives:
| Result | Value |
|---|---|
| Ethanol | 511.43 t |
| Ethanol at 20 °C (absolute) | 648,009 L |
| Ethanol per tonne of sugar | 648.01 L/t |
| CO₂ released | 488.57 t |
Open this example in the calculator and change any input.
Formula
\(C_6H_{12}O_6 \rightarrow 2\,C_2H_5OH + 2\,CO_2, \quad m_e = 2 n_{hex} M_{EtOH} \eta_f\)
Variables
| Symbol | Meaning | SI unit |
|---|---|---|
| \(m\) | Sugar fermented | kg |
| \(\text{sugar}\) | Sugar | - |
| \(\eta_f\) | Fermentation efficiency | - |
| \(\rho_e\) | Ethanol density at 20 °C | kg/m³ |
| \(m_e\) | Ethanol | kg |
| \(V_e\) | Ethanol at 20 °C (absolute) | m³ |
| \(y\) | Ethanol per tonne of sugar | m³/kg |
| \(m_{CO_2}\) | CO₂ released | kg |
Method and standards
Stoichiometry.
Where it is used
- Distillery yield targets.
- Ethanol from cane juice or molasses studies.
Common mistakes
- Sucrose treated as hexose.
- Bulk litres instead of absolute.
Assumptions and limits
- Complete conversion to ethanol at η_f = 1. Below that, ethanol and CO₂ are both scaled by η_f; sugar diverted to yeast growth and by-products also releases some CO₂, so the CO₂ figure is then a lower estimate.
References
- Gay-Lussac stoichiometry C₆H₁₂O₆ → 2 C₂H₅OH + 2 CO₂ with IUPAC atomic masses; ethanol density 789.24 kg/m³ at 20 °C (OIML R 22)
Questions and answers
What is the theoretical yield?
0.511 kg of ethanol per kg of glucose, about 648 L per tonne; sucrose gives 5 % more because it takes up water when inverted.
Why is real yield lower?
Yeast uses sugar to grow and makes glycerol, acids and fusel oils.
CO₂?
Nearly as much CO₂ as ethanol by mass: 0.955 kg per kg ethanol.
Method and article reviewed by FireCAD engineering on 13 November 2026. Every result is checked against an independent calculation on each release: how we verify our calculators.